Misc Parts

[Nordicflame]

Have pics of everything on request...
Thanks,
Dave


 MEFI distributor $75, new pickup and module
 TB-IV harness $70pr
 TB-IV distributors $100pr
 (2) Fluidamprs Int 8” balancers. One looks perfect, one has a sleeve on the seal surface(?) $75 for both. Primed and ready to paint your color
 (2) HP20 TB-V modules 840130A4 (5450 rev limit) and knock sensor setups $200pr
 (2) Merc Racing oil thermostat assembly setups, complete with filter adapter and hoses for Mk IV $400pr Excellent
 (2) Mercury Racing blue HP500 alternators work perfect $90pr
 (2) Lifting eyes (head mount, mounted for pictures only) TCM TCMLFTUNIV $40 (1 set)
 (2) Rear mount Merc electrical brackets p/n 14037 $50 pr
 Crower Enduro 4.500 crank (ext balanced to 2398bw 502 ext flywheel), will include Mallory for internal balance if required) dyno time only ...PM for deatils
 oil, tranny or PS coolers. 2” x ~12” OK shape / do not leak $30 both
 (4) S pipes (cast 496HO setups) $100
 (8) 4” Merc exhaust hose connectors with clamps $70all
 (2) near new drive reservoir bottles (no brackets) $40pr
 Full set of Gaffrig II gauges for twin set up. (2) tachs, (2) speedos, (2) oil pressure, (2) water temp, (2) volt meter, (3) fuel level. All perfect and include mounting hardware $375 for all
 Merc Water pump assembly for serpentine (pulley and main hose) 454/502 MPI $40
 Merc Water pump, no leaks $25
 Isky 8005A springs and retainers less than 12 hours perfect HP500/500EFI replacements, went to bigger cam) $75
 (1 set) Dented Gibson transom mounts, can be mounted with steering ram dents down. $60
 (2) Merc HP500/Bulldog fuel pumps with fittings, work perfect $60pr
 New shift cable 865437A02 (cable only as shown) $30
 280 K-Plane plates, like new, not a scratch $200
 Merc Cool Fuel (496HO) less than 25 hours 864650 $200
 (1) 496HO intake assembly, complete with everything except TB less than 25 hours $250
 (2) Edelbrock 4150 1” carb spacers, phenolic $25 pr
 (2) 4150 sandwich style throttle mounts $30 pr

[merlin]

Can you send picture of the custom elec brackets & 90 deg fittings.
Tony @ ofboat@bellsouth.net

[Formula311-SR1]

Can you send a picture of the (2) Merc HP500/Bulldog fuel pumps with fittings & (2) Rear mount Merc electrical brackets p/n 14037 to
richkr12@netzero.net?

Thanks

Wouldn't happen to have a thermostat housing -500 HP style?

[Nordicflame]

Pics sent...

[Nordicflame]

Can you send picture of the custom elec brackets & 90 deg fittings.
Tony @ ofboat@bellsouth.net

Sold and removed from list...
Thanks

[PARADOX]

I''l take the water pump for the 454, as long it's good cond.

[ROGUE]

pick of exhaust hoses please? Are they the standard merc hoses with the dual slots on each end for the clamps?

[14 apache]

fluid dampers Ill take them let me know the shipping to 11804. Thanks Eric

[Nordicflame]

I''l take the water pump for the 454, as long it's good cond.

Hey Paradox,
It's in good condition. PM me your email adress and I will shoot you a picture.
Thanks,
Dave

[Nordicflame]

pick of exhaust hoses please? Are they the standard merc hoses with the dual slots on each end for the clamps?

Rogue,
Sorry those were sold.
Thanks,
Dave

[Nordicflame]

fluid dampers Ill take them let me know the shipping to 11804. Thanks Eric

Hi Eric,
Guessing 20lbs it shows $29 to your zip.
$100 to your door will work.
PM me your info.
Thanks,
Dave

[Nordicflame]

 MEFI distributor $75, new pickup and module
 Crower Enduro 4.500 crank (ext balanced to 2398bw 502 ext flywheel/balancer), will include Mallory for internal balance if required) dyno time only $975
 (2) near new drive reservoir bottles (no brackets) $40pr
 Full set of Gaffrig II gauges for twin set up. (2) tachs, (2) speedos, (2) oil pressure, (2) water temp, (2) volt meter, (3) fuel level. All perfect and include mounting hardware $375 for all
 (2) HP20 TB-V modules 840130A4 (5450 rev limit) and knock sensor setups $200 for all
 Merc Water pump (assembly) for serpentine (pulley and main hose) 454/502 MPI $40
 Merc Water pump, no leaks $25
 Isky 8005A springs and retainers less than 12 hours perfect HP500/500EFI replacements, went to bigger cam) $75
 (1) Merc Racing Mk-IV fuel pump p/n 92864 with fittings, works perfect $30pr
 (2) Merc Racing oil thermostat assembly setups, complete with filter adapter and hoses for Mk IV $400pr Excellent
 280 K-Plane plates, like new, not a scratch $200
 Merc Cool Fuel (496HO) less than 25 hours Merc p/n 864650 $200
 (1) 496HO intake assembly, complete with everything except TB less than 25 hours $250
 (2) Edelbrock 4150 1” carb spacers, phenolic $25 pr