Winter Projects

[Cig Flat Deck]

hahaha the best part all those pics were taken by your phone.

[MILD THUNDER]

hahaha the best part all those pics were taken by your phone.

It was cool, until you won keith a teddy bear with your ski-ball skills. Then it just got weird from there..

[SC288]

Lookin' sweet Ryan!

[Magic Medicine]

It was cool, until you won keith a teddy bear with your ski-ball skills. Then it just got weird from there..

[Magic Medicine]

Boat looks sweet Ryno

[J-Bonz]

Just a couple of things i've been up too.

Lookin good bro!!

[Cig Flat Deck]

Thanks everyone! I will have some engine pics tomorrow

[10x]

Boats lookin good Ryan !!! Now for the engine pics.

[Cig Flat Deck]

Here is what me and the boys have been working on. not all the way finished but close.

[Magic Medicine]

Here is what me and the boys have been working on. not all the way finished but close.

Nice!!!!

[rschap1]

WOW
Really nice looking powerplants

[eightsecmopar]

Awesome! Those would look nice in my Bullet.....wanna trade?

[10x]

Ryan, looks pretty good. What size is the fuel line ?? You may want to run 2 lines from the fuel pump, one to each carb. You can put a fuel manifold after the pump that splits it into 2 lines. Teague marine sells em.

[10x]

Here's what I'm talking about.

[WETTE VETTE]

Motors look great! Speaking of fuel are those stock pumps?

[Cig Flat Deck]

they are the 110 gph mech with 140 gph electric

[WETTE VETTE]

Gotcha. That's the way to go in my opinion.

[SC288]

Need to try some more props....anyone know of any 29 Mirage's laying around somewhere? Craig and I ran the boat Monday night on our small lake and with the standard 30's the boat ran a little over 81 at 5,000 RPM. Tried the labbed 30's (Do not know who labbed them or what they were labbed for) 5,250 RPM same speed. The 5 bladers would not work as the back of the prop casting was hitting the inside of the hub on the anode.

[Twin Whackas]

Put my 28's on and let those motors zing...ha ha.
All these projects going on, can't wait for the weather to get nice and do some boating.

[Tony M]

Need to try some more props....anyone know of any 29 Mirage's laying around somewhere? Craig and I ran the boat Monday night on our small lake and with the standard 30's the boat ran a little over 81 at 5,000 RPM. Tried the labbed 30's (Do not know who labbed them or what they were labbed for) 5,250 RPM same speed. The 5 bladers would not work as the back of the prop casting was hitting the inside of the hub on the anode.

I have a labbed 30 bravo L/h that's @ 29.6 from B.Blades , plus a 30p with the defuser cut off that never did me any good but all are left hand / a 28p bravo Lh stock . p.m me to try them if you can use them . .