HP and a 38 T/S

[Quinlan]

What kind of HP would it take to get a T/S Bravo to 100mph?
Just courious if anybody is there and what it took to get there.
Mine are going back in NOW and ready to run.
EVERYTHING new but the crank and the block.

Can anybody say go BRAD SMITH!!!

Oh and they are some LOUD MOFO's

[jryan26]

700 should be close

[L-V]

find some 93 and you are there! and yes, those dry pipes shooting out of that building on the dyno will make your ears hurt!

[OldSchool]

700 should be close

Bingo!

[Quinlan]

95.3!! Brad Smith POWER! Best todate.

[FastTimes]

Rock On ! !

[JupiterSunsation]

Joe tapped 100 mph with his 600 sci boat but I don't remember what he did to the engines. He did do a lot of prop testing.

[Sea-Dated]

700-750 should do it with the right props.....

[Quinlan]

Guess its time to put that smaller pully on

[Tommy Gun]

Joe tapped 100 mph with his 600 sci boat but I don't remember what he did to the engines. He did do a lot of prop testing.

Joe's was a 39.

[OldSchool]

Guess its time to put that smaller pully on

...and get a backup outdrive or two!!!!

[J.T.]

...and get a backup outdrive or two!!!!

+ 1

[Quinlan]

anybody got any 1.36s fo sale

[thedonz]

Joe tapped 100 mph with his 600 sci boat but I don't remember what he did to the engines. He did do a lot of prop testing.

I ran it with him at 100.2 mph and yes it was a 39 with 600's...and yes we did A LOT of prop testing

Mike

[cigracing1]

Has anyone done a recent 38TG with merc 600"s? If so post picks and speeds.

[Bgchuby01]

we have a guy in scope with a 2003 ts with 750 zuls and it runs 103 104 with bravo's

[Tank]

we have a guy in scope with a 2003 ts with 750 zuls and it runs 103 104 with bravo's

true!

[Quinlan]

I belive I am around 625 w the stock pullys.