The verdict is in

[txriverrat2001]

Ouch!!! Wish ya well on the rebuild!! Gil recently did the 540 upgrade on his 502's and was really pleased....

Or ya could just buy this so we can get the newbie......

[BY U BOY]

Ouch!!! Wish ya well on the rebuild!! Gil recently did the 540 upgrade on his 502's and was really pleased....

Or ya could just buy this so we can get the newbie......

I wish

[TxHawk]

Ok so lets make this fun.
What parts(combo) would you do.

I am going to keep the same heads(ZZ502 Aluminum)and the BG 830 carb.Everything else can be changed.

So lets hear it but lets not get crazy as I do have to keep some sort of budget

If it was 4.470 before, go 4.500, put a good set of rods in it, and work on the heads. I would go for something in the 9.5:1 range. Get some help on the cam and go.

I did a 22 Scarab with a mild 509 and it was a lot of fun. Had a customer put a blown 502 in one that was in 750HP range and he couldnt ever use the power.

[BY U BOY]

If it was 4.470 before, go 4.500, put a good set of rods in it, and work on the heads. I would go for something in the 9.5:1 range. Get some help on the cam and go.

I did a 22 Scarab with a mild 509 and it was a lot of fun. Had a customer put a blown 502 in one that was in 750HP range and he couldnt ever use the power.

I'm thinking some H beams and going back with the 10.1:1 and talk with RMbuilder about cams and go to a single plane intake. Not going to mess with any type of blower,dont have the room under the hatch anyway and i sure as hell aint redoing it again

crank is still up in the air.