Dropped the motor in the boat today. I would have taken some pictures, but I think I was about to stroke out (didn't eat anything all day and definately didn't drink enought water) by the end of the day.
Got the oil lines plumbed and the carb put back on the motor. Still need to install the exhaust, put the drive together (and put it on) and do a little more with the fuel plumbing (my carb isn't setup exactly like Sean's was).
I'll try to get some pictures tomorrow...
Tim, I don't see how you do it in 114* heat. I guess I should have been drinking beer
Thread: finally (progress)
Results 1 to 20 of 73
Hybrid View
-
finally (progress)
Registered
- Join Date
- Nov 2008
- Posts
- 181
05-31-2009 09:38 PM
-
Charter Member
- Join Date
- Oct 2008
- Location
- Huntington Beach, CA
- Posts
- 3,951
05-31-2009 11:58 PMWow, it looks that good huh!?
Originally Posted by duunoit
Glad to hear it's coming along! I had a good day messing with the 24 today, although I nearly cut my arm off trying to get the plugs out of the stbd motor...
"Tear gas and draft beer don't mix."
-
Registered
- Join Date
- Nov 2008
- Location
- Atl. Ga
- Posts
- 173
06-01-2009 09:01 PMthis thread is worthless without pics
-
Registered
- Join Date
- Nov 2008
- Posts
- 181
06-01-2009 10:09 PMThe thread, me... yep totaly worthless.
I only got about 30 minutes to mess with it today (not counting putting my mess up and getting the boat out of the driveway so I can get to work tomorrow). About the only thing I accomplished was getting the studs in the drive for the drive spacer. I also got my fuel plumbing situated.
If it makes you feel and better the pictures would look the same today as they would yesterday
-
Charter Member
- Join Date
- Oct 2008
- Location
- Huntington Beach, CA
- Posts
- 3,951
06-02-2009 02:56 AMThe motor look good sitting in there or is it lemon/lime sprite?
"Tear gas and draft beer don't mix."
-
Registered
- Join Date
- Nov 2008
- Posts
- 181
06-02-2009 06:37 AMIt's lymon.
I'll put those other valve covers on and that will make it look a little better. Scotty offered to paint the air cleaner for me this fall/winter so that will look better.
-
Registered
- Join Date
- Nov 2008
- Posts
- 181
06-08-2009 08:49 PMGot to work on it today while Brit and Jr took a nap after a day at the pool. Got the ignition on and wired up. Got the exhaust on and got the oil temp sender wired up. I was going to put the valve covers on before I did the exhaust but I don't know what I'm going to do about the breathers....
Still have to put the drive together (and on) and put some fluids in the motor and I'll be ready to go.
Anywho, here are some pictures.
-
Registered
- Join Date
- Nov 2008
- Location
- Michigan Thumb
- Posts
- 115
06-10-2009 09:53 AMLooks good in there ..... too bad the prior owner didn't step up and paint the bildge white! the motor would look perfect then! Originally Posted by duunoit
Also isn't that Aeroquip push lock hose and fittings the best to work with!! all is great except undoing and re-rigging but I love them.
-
Registered
- Join Date
- Nov 2008
- Posts
- 181
06-10-2009 10:58 AMI probably should have taken a couple of the hoses apart, cut them down and put them back together, but I got them to work like they were without kinking/folding them so I figured I ought to leave them alone. Originally Posted by Mikeb4
-
Charter Member
- Join Date
- Oct 2008
- Location
- Huntington Beach, CA
- Posts
- 3,951
06-08-2009 09:13 PMVery nice! Wait 'til you hear it fire off through those pipes!
"Tear gas and draft beer don't mix."
-
Founding Member
- Join Date
- Oct 2008
- Location
- Gato RD. Little Torch Key
- Posts
- 26,175
06-08-2009 10:34 PMlooks great in those colors
Parabellum FJ²B
-
Registered
- Join Date
- Nov 2008
- Posts
- 181
06-09-2009 10:16 AMThe valve covers and air cleaner kind of clash with the bilge. I've got another set of valve covers and will be getting the ac painted to match so it looks a little better...
-
-
Charter Member
- Join Date
- Oct 2008
- Location
- Huntington Beach, CA
- Posts
- 3,951
06-09-2009 11:17 AMIt's funny, its almost like seeing nude photos of your ex girlfriend on the internet...
"Tear gas and draft beer don't mix."
-
Registered
- Join Date
- Nov 2008
- Posts
- 181
06-09-2009 12:16 PM:d Originally Posted by dude! Sweet!
-
Charter Member
- Join Date
- Oct 2008
- Location
- Omaha NE
- Posts
- 417
06-23-2009 02:55 PMLMAO!!!!!!!!! Originally Posted by Dude! Sweet!
It's funny, its almost like seeing nude photos of your ex girlfriend on the internet...
Just remember I had her before you
-
Registered
- Join Date
- Nov 2008
- Posts
- 181
06-23-2009 02:58 PMMy wife got asked this weekend if we were from Nebraska. Yep, towed it all the way here from Nebraksa to boat on the Tennessee river...
People kill me.
-
Charter Member
- Join Date
- Oct 2008
- Location
- Huntington Beach, CA
- Posts
- 3,951
06-23-2009 06:27 PMI couldn't open that video on my phone. Would you post it already!? Originally Posted by duunoit
"Tear gas and draft beer don't mix."
-
Registered
- Join Date
- Nov 2008
- Posts
- 181
06-23-2009 10:08 PMwhat a pain in the a$$ coverting .3g2 files to .avi
-
Charter Member
- Join Date
- Oct 2008
- Location
- Huntington Beach, CA
- Posts
- 3,951
06-23-2009 06:27 PMAh well, you treated her right... maybe that's why she didn't like me as much. And don't forget, I probably saw her at Ducky's back in 1996 when she was new! Originally Posted by Griff
LMAO!!!!!!!!!
Just remember I had her before you
Hope all's well in Omaha!
"Tear gas and draft beer don't mix."
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts