24baja with 700hp

[bajabob 718]

here is my motor on the dyno . how fAST DO YOU THINK????? http://www.youtube.com/watch?v=eL8i0Tnw7Qk

[Donskihp]

Whats your boat weight?

[bajabob 718]

BOAT IS 4000PD TWO WEEKS AGO IT DID 80.4 MPH WITH 600HP

[carter38]

Pretty fast for that hull. Becareful.

[JFM]

Nice job. Be careful with all that pushing a 24'.

[Donskihp]

I've seen test showing how much hp to push a boat 1 mph, and it seem to always adds up to 20 hp for 1 mph. which would increase your by 5 mph. my guess would now be 85mph

[jeffswav]

Bob, I would think 85 or so. Raising your x would make a huge difference in speed and handling. I would be a little nervous running that fast trimed up with the stock drive height. My boat is more stable now at 74 that when I ran 68 with the stock x.

[jeffswav]

Also, what drive are you running. You are pushing your luck with the Bravo.

[Offshore Ginger]

Bob , seeing that you are running 700 HP you are going to have to change your screen name to bajabob 700 and drop the 600

[bajabob 718]

Bob , seeing that you are running 700 HP you are going to have to change your screen name to bajabob 700 and drop the 600

ya you are rigth . i think 600 was all i wanted to run . o well my finaly run today was 34deg. 680tq 718hp.

[Offshore Ginger]

ya you are rigth . i think 600 was all i wanted to run . o well my finaly run today was 34deg. 680tq 718hp.

So now its going to be bajabob 718 kinda got a nice ring to it .

[Trim'd Up]

I had the same boat to 91 gps with me and a buddy in it with more throttle left. My engine made 711hp on the dyno. The X dimension on my boat was raised 3 1/2"s, all of the wood was replaced with coosa, and the cuddy was stripped so it quite a bit lighter than stock. The boat is running 75+ with a stock 502 mag now so the weight savings made a difference.

[bajabob 718]

I had the same boat to 91 gps with me and a buddy in it with more throttle left. My engine made 711hp on the dyno. The X dimension on my boat was raised 3 1/2"s, all of the wood was replaced with coosa, and the cuddy was stripped so it quite a bit lighter than stock. The boat is running 75+ with a stock 502 mag now so the weight savings made a difference.

nice jop wt prop were you runnig . here is my dyno last pull. now in the boat i hope to test saturday

[Trim'd Up]

nice jop wt prop were you runnig . here is my dyno last pull. now in the boat i hope to test saturday

A 4 blade Mach 30p. I really like the Mach props on the outlaws as do a few of my friends that have the same boats. The boat was MUCH more stable than with a Bravo.

[bajabob 718]

ya i am runnig a136drive with a 25mirage with the last motor

[bajabob 718]

http://www.youtube.com/user/SuperBaj.../0/XKQj2fy91BU here my boat runnig at the dock

[baditude]

i see 85-86ish in my 24 running what whipple says is 650hp with a 4 inch raised x, extension box, and 2 inch shorty running a labbed 32p 5 blade

[bajabob 718]

wow that great did the 4in lift help alot?did you try your boat with out the 4in ? and if you did wt speed did you get out of it . i am still tested and like to go in the rigth direction

[baditude]

i bought the boat as is the previous owner said that with the old motor a procharged 502 with a stock bravo 1 stock x dimension and single ram steering said it was low to mid 70s and was fairly unstable

[jeffswav]

i see 85-86ish in my 24 running what whipple says is 650hp with a 4 inch raised x, extension box, and 2 inch shorty running a labbed 32p 5 blade

What is your propshaft depth? What ext box did you use?