Scarab owners check in...

[SCARAB3DMC]

Dave,stop out to the house when your in Vermilion---Buy you guys a beer!!! Do you know how to get here by boat??


Jim

sounds like an offer I cannot refuse, shoot me the directions,

[Cigboat#1]

Dave, first canal past Valley Harbor,hard right and then a quick left ,follow canal around to the end.. Be careful very narrow canal.. House is at the very end of the canal --- check the avatar


Jim

Did you hear from that guy from Detroit about your boat?

[SCARAB3DMC]

Dave, first canal past Valley Harbor,hard right and then a quick left ,follow canal around to the end.. Be careful very narrow canal.. House is at the very end of the canal --- check the avatar


Jim

Did you hear from that guy from Detroit about your boat?

What guy in Detroit ???? thanks

[Cigboat#1]

I guess I read your boat was for sale on another site and thought that some guy from Detroit was interested,,, Thought it was the same guy I told to buy a 34 if he was going to run around on Lake Erie... Maybe I was wrong?

Jim

[SCARAB3DMC]

I guess I read your boat was for sale on another site and thought that some guy from Detroit was interested,,, Thought it was the same guy I told to buy a 34 if he was going to run around on Lake Erie... Maybe I was wrong?

Jim

yep she is for sale.. but I have not heard from anyone in Detroit, not pushing the sale too hard anyway...

[Denny]

I got a 86 scarab panther with trs drives and 2 502's..... Can't seem to find the right props to get going... Just blows out and over revs the engines ... Anybody have a clue?

[Hondo Jet]

Any update on this nice 26 ????

Just put it in the water tonight for the first time. Everything checked out OK, transmission, drive, engine maintained 180/190 degrees throughout some serious flogging. Now its time to get busy on rebuilding the seat bottoms and getting the interior back together.

I used a 454 that I already had. Not sure how much hp its pushing but seriously doubt if its over 350-375. I knew it ran and in the interest of not spending too much right now went ahead and put it in. I'll build something stronger for it over the winter cause I can already see its begging for another couple hundred HP.

I need a better set of exhaust manifolds immediately if anyone has some laying around.

[Bobcat]

I got a 86 scarab panther with trs drives and 2 502's..... Can't seem to find the right props to get going... Just blows out and over revs the engines ... Anybody have a clue?

You should ask this question in the props forum, you'll get some responses from the prop manufacturers.

http://www.seriousoffshore.com/forum...splay.php?f=33

[Denny]

Need help have a 86 panther with2 502with trs drives... Can't figure out what props to run that don't over rev?.

[Scarab KV]

Just put it in the water tonight for the first time. Everything checked out OK, transmission, drive, engine maintained 180/190 degrees throughout some serious flogging. Now its time to get busy on rebuilding the seat bottoms and getting the interior back together.

I used a 454 that I already had. Not sure how much hp its pushing but seriously doubt if its over 350-375. I knew it ran and in the interest of not spending too much right now went ahead and put it in. I'll build something stronger for it over the winter cause I can already see its begging for another couple hundred HP.

I need a better set of exhaust manifolds immediately if anyone has some laying around.

Very nice. Keep us updated

[Denny]

Need help ... Have a 86 scarab panther with 2 502's with trs drives..... Can't figure out what props to use to stop the engines from over revving..... Any clue

[Cigboat#1]

What size props are you running now??

[jhenrie]

Need help ... Have a 86 scarab panther with 2 502's with trs drives..... Can't figure out what props to use to stop the engines from over revving..... Any clue

Check with geronimo here. He was panther on the other site. Sure he can give you some guidance.

[Out There]

Great to see that Scarab back on the water so quick!
Looks very good!

[Denny]

Have try soooo many now running 26 4 blades tried 32 4 blades same problem.

[Rookie]

Have try soooo many now running 26 4 blades tried 32 4 blades same problem.

What HP are you running, what speed (GPS) and what are the RPM's that is to much? You need to give a little bit more info if you want some answers. I was spinning 25's around 5100RPMs a little over 71mph. If you are over revving 32's are you sure your trannies aren't slipping?? I had that problem, rebuild time. Also with my 25's I had to add cupping to get mine to stop blowing out.

[old377guy]

off topic, but - good to see you here, rookie

[Rookie]

off topic, but - good to see you here, rookie

Thanks!! Will try to visit more ofter. Hope all is well with you. And sticking with the theme of your Avatar we need some pics.

[old377guy]

a more recent picture

[Out There]

Finally have a photo to post. That shot was taken at Lake Murray, SC at their Poker Run.