That would get pretty hot for the folks in the back seat drinking beer...
Thread: finally (progress)
Results 61 to 73 of 73
-
Registered
- Join Date
- Nov 2008
- Posts
- 181
07-22-2009 10:33 AM
-
Charter Member
- Join Date
- Oct 2008
- Location
- Huntington Beach, CA
- Posts
- 3,951
07-22-2009 12:11 PMYou know what Billy Chrystal said... it's not how you feel, it's how you look...
Originally Posted by duunoit
-
Registered
- Join Date
- Nov 2008
- Location
- Atl. Ga
- Posts
- 173
07-22-2009 07:31 PMlol!!!! Originally Posted by dude! Sweet!
-
Registered
- Join Date
- Nov 2008
- Posts
- 181
07-27-2009 06:17 PMGot everything out but the crank today. I think I found my problem
-
Registered
- Join Date
- Nov 2008
- Posts
- 500
07-27-2009 06:36 PMYeah I believe you found the issue !!
Now see if you can find my inner transom plate.. I've been tearing the shop apart for the last hour looking for it & have yet to locate it..
-
Registered
- Join Date
- Nov 2008
- Posts
- 181
07-27-2009 06:57 PMThere's one here for you. I've got one of my guys that will be here from Chattanooga the weekend of the 8th-9th. Or the next time you're up this way.
-
Registered
- Join Date
- Nov 2008
- Posts
- 500
07-27-2009 08:49 PMThanks buddy I really appritiate the offer, but thankfully I just found mine a little while ago in the back of the shop where I put it up for safe keepings so I wouldn't misplace it.. Originally Posted by duunoit
I am so glad I found it b/c it has some of my Hyd. lines & a block for the ITS system.. I was starting to get frantic b/c although I don't claim to be the most organized guy in the world, thats not the kind of thing I loose..
Again I really appritaite it !!
-
Charter Member
- Join Date
- Oct 2008
- Location
- Huntington Beach, CA
- Posts
- 3,951
07-28-2009 06:25 AMThat's stinks. I hope it goes back together quick and easy bud!
-
Registered
- Join Date
- Nov 2008
- Posts
- 181
08-03-2009 08:56 PMCrank, block and pistons are at the machine shop. Crank will be magnafluxed before any of the expensive work is done to it...
Also got some time to work on the old Rose Marie. Got the drive put together. Went to put my oil dipstick in and had to mess with it for a while (and had to do some custom work to it)... d@mn oil pan was full of water. I guess that will teach me to just put a bolt in the hole and let the cover blow off of it. Anyway, got it drained and refilled after a trip to the parts store. Went to to crank it up. Nothing. I think I might have the distributor out of phase, but my coil has definatley pooped the bed on me. Back to the parts store.
Tomorrow.
Maybe.
-
Charter Member
- Join Date
- Oct 2008
- Location
- Huntington Beach, CA
- Posts
- 3,951
08-03-2009 09:04 PMUmmm, good luck with that... If you keep it up, you'll go blind. Originally Posted by duunoit
-
Charter Member
- Join Date
- Oct 2008
- Location
- Huntington Beach, CA
- Posts
- 3,951
08-03-2009 09:06 PMSeriously though, those are some nasty bearings! I don't think I've seen one taken out that bad that still had the rods in the motor. Hopefully everything turns out all right at the machine shop.
-
Registered
- Join Date
- Nov 2008
- Posts
- 181
08-03-2009 09:50 PMI knew that was coming but left it there for everyone's amusement Originally Posted by Dude! Sweet!
Ummm, good luck with that... If you keep it up, you'll go blind.
-
Registered
- Join Date
- Nov 2008
- Posts
- 181
08-03-2009 10:04 PMI'd say that if I got it started again, I would have lost it trying to load it on the trailer... Originally Posted by Dude! Sweet!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts