well I have bought a HP500 it has been bored .030 over it is apart.
What would you put in it for 550-600 hp
It for my cig 20 I have pistons crank and rods all in good shape I know I will need some porting on the stock heads
would like to be normally asperated and with a carb as I dont have $ in budget for Fuel Injection
On my bullet I have Barry Grany 850 Marine Demon Carbs and would like to stay with that for a carb.
Cam Recomendations?
Klaw
Thread: Build me a motor for my Cig 20
Results 1 to 5 of 5
-
Build me a motor for my Cig 20
Registered
- Join Date
- Nov 2008
- Posts
- 89
04-28-2009 09:38 AM
-
Contributor
- Join Date
- Oct 2008
- Posts
- 4,796
04-28-2009 10:33 AMAFR 325 heads with partial CNC is going to give you the most bang for the buck. Get Bob Madara to do a custom cam for you and you're there.
-
Registered
- Join Date
- Nov 2008
- Posts
- 89
04-28-2009 11:36 AMwith porting can I get ny stock heads to flow enough
-
Charter Member
- Join Date
- Oct 2008
- Location
- NEW JERSEY
- Posts
- 1,028
04-28-2009 01:45 PMRon Potter just turned my friends pair of 525's into 630's. I don't know what he did but he could probably do the port work and give you the part info to build up yours if you are doing it yourself.
-
Contributor
- Join Date
- Oct 2008
- Posts
- 4,796
04-28-2009 02:16 PMThe porting would cost more than the AFR's. Plus, you lose the aluminum advantage on upped compression.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts