Thank you. I think I am going to drill a hole where my cuts will meet and score it as deep as I can with the Metabo. If I am not through it yet... Mr. Sledge and Mr. Spud Bar. Maybe a strategic Hilti-zation. Then there is the air chisel.
Have a good weekend.
You can look at the menu but you just can't BAMM!
Results 15,281 to 15,300 of 19365
-
04-09-2021 09:28 PM
Last edited by fund razor; 04-10-2021 at 06:58 AM.
-
04-10-2021 06:41 AM
Mornin!
I think Howard Jones wrote a Song in the 80's...."No One is too Bamm"
I think Your on the right track. Score it with the Grinder, Then Chip it out, there might be some Road Mesh (Wire Fence) in it.
Use a Simpson Post Anchor in at least 18" deep hole. That way if the Post rots, or is run into, You can unbolt it and stick in a new one.
Do You Guys use Sonotube ? Keeps the Frost from lifting the Concrete.
I have a feeling that Chocolate Brown Metal Flake is going to make a strong comeback next Summer...Look for Outerlimits to lead the way...Parabellum FJ²B
-
04-10-2021 07:01 AM
2 inch schedule 40 galvanized, baby. Double chain link gate.
We go down minimum 36 inches. For structural 4x4 or 6x6 we use biscuits at the bottom of the hole. Lots of guys put bolts in the post below ground for anchors.
-
04-10-2021 07:06 AM
Picking up boat from storage today. Always a good milestone of spring.
-
04-10-2021 08:19 AM
A couple more weeks before getting the Hydra Sport out. I might pull the RIB out of the barn today.
-
04-11-2021 05:34 AM
Mornin!
We usually go 24" with 6x6 with a Rebar Cage...But We're going into solid Rock...I'm setting 4 4x4's Today...Probably take Me 3-4 Hours .
Then it's back to Screwing in the Pickets....
Going to try and Float the Paddleboard this Week....Parabellum FJ²B
-
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,351
- Blog Entries
- 44
04-11-2021 11:47 PMThe blizzard was a foretelling ?
Getting bad advice is unfortunate, taking bad advice is a Serious matter!!
-
04-12-2021 05:47 AM
Mornin!
Looks like Andy got the short end of the Driveway....Smooshed His Name in there
Crap...It took Me 4 hours to set two 4x4's Yesterday...Friggin Palm Tree Roots are a Bear!!
Looks like Rain Today...Parabellum FJ²B
-
04-12-2021 07:19 AM
I was told a palm tree does not have very deep roots? But I have never been on vacation with my shovel to check that.
-
- Join Date
- Nov 2008
- Location
- Cudjoe Key FL
- Posts
- 1,322
-
04-12-2021 10:56 AM
Trailer tire question:
Triple axle. Maybe 10,000 pounds. 15x6 rims. Stick with 205/75R15 or step up to 225/75R15 and why?
-
04-12-2021 11:07 AM
I say 205 on 6 inch rims. I have 225 on 8 inch and the side wall looks good. Get 10 ply E rated.
-
04-12-2021 11:56 AM
Hmmm. Have been looking at Goodyear Endurance (USA) to replace my Goodyear Marathon (China) and the 205 size is 8 ply, the 225 size is 10 ply.
-
04-12-2021 12:07 PM
Haven't shopped trailer tires in a while...
Batteries are bad enough, or expensive enough, anyways
Welcome to a new week, ENJOY
-
04-12-2021 12:35 PM
I bought batteries a couple weeks ago. Inflation had found them.
-
04-12-2021 12:39 PM
my 225 have 7 inch tread width. If you don't plan a long road trips 8 ply is ok. I bought 10 ply for long road trips.
-
04-12-2021 12:41 PM
I'm on my last season the seventh on my DEKA Intimidator AGM batteries. They were worth the money.
-
-
04-12-2021 07:25 PM
Looking at Goodyear Endurance because USA.
205 is D rated, 8 ply.
225 is E rated, 10ply.
But... the D rating is still inside the ballpark, and what I had with the Chi-Marathons. Speed rating is N though. 87mph.