Drive Shaft Flanges

[spiker]

Where can I get the drive shaft flanges that will match to a Huber transission and or have a drive shaft made. Your help is appreciated.

[OneBadInjun]

Any Dana-Spicer dealer would have them. Or truck driveshaft/driveline shop. Sometimes contacting your local bearing supplier will know also. Then, of course, you can call Huber themselves.

[spiker]

Huber does not sell them

[DAREDEVIL]

Where can I get the drive shaft flanges that will match to a Huber transission and or have a drive shaft made. Your help is appreciated.

Which ones do u have on them #3-5 or #6 flanges ????

[mbam]

We have billet flanges to fit the trans in both the 1350 (#3,4,5) and 1480 (#6) Spicer series.

[spiker]

#6 flanges

[Ratickle]

We have billet flanges to fit the trans in both the 1350 (#3,4,5) and 1480 (#6) Spicer series.

I thought you may have them, thanks Marc...


See you in Sunny Isles?

[mbam]

Yep, i'll be there. Probably drive down Fri night, take the boat Saturday.

Spiker, you can call me at 954 545 8681 if you need the flanges.

[chris sunsation]

Where can I get the drive shaft flanges that will match to a Huber transission and or have a drive shaft made. Your help is appreciated.

If you need a drive shaft call CCI Drive Line 586-716-1160 ask for Jamie and tell him I sent ya!

They do all of Sunsation's drive shafts and I believe they are doing J.D Byryder's as well

[spiker]

Thanks for the input