Reversion....

[FormulaMatt]

Do you think I will have reversion issues with this cam on my 383 Stroker? It has the stock 4" thru hull above water exhaust on it.

Crane 109831
PowerMax Hydraulic Roller Tappet Camshaft
Lift .509 /.528 Duration 284 deg /292 deg
RPM Range 2000-6200

http://www.jegs.com/i/Crane+Cams/270/109831/10002/-1

[FormulaMatt]

Also, I have Pro Comp aluminum heads on it if it matters. I will upgrade the exhaust later this year. Just running out of money at the moment with the rest of the restoration and building this new stroker...

[DAREDEVIL]

If u have wet exhaust, i would say yes

Before u buy it , give BOB Medara a call, he can build u a cam for what your need is and it will 100% work !!!!! IMO

[FormulaMatt]

If u have wet exhaust, i would say yes

Before u buy it , give BOB Medara a call, he can build u a cam for what your need is and it will 100% work !!!!! IMO

I already have it. It came with some parts I am using for my stroker. It had very low hours and I was going to use it. Can you explain a "dry" exhaust for me? How hard to convert?

[DAREDEVIL]

I already have it. It came with some parts I am using for my stroker. It had very low hours and I was going to use it. Can you explain a "dry" exhaust for me? How hard to convert?

A dry exhaust does not mix the water in the pipe !!!!! new tailpipes would be needed !!!

But then again, if u want to upgrade anyways,,i sell u mine !!!!!

Stainless Marine High Tourqe III 4.5 inch pipes and DRY !!!!!!!!

Pm me , if intrested....CHEAP !!!!!

[MacGyver]

Dry exhaust = loud

[DAREDEVIL]

Dry exhaust = loud

YEP....isn't that what makes it nice..LOL

[Chris]

You'll definitely have reversion with that cam.

You don't need dry exhaust unless you have a very radical cam. But what you do need is an exhaust that mixes much closer to the outlet.

[FormulaMatt]

A dry exhaust does not mix the water in the pipe !!!!! new tailpipes would be needed !!!

But then again, if u want to upgrade anyways,,i sell u mine !!!!!

Stainless Marine High Tourqe III 4.5 inch pipes and DRY !!!!!!!!

Pm me , if intrested....CHEAP !!!!!

Will these work with my SBC? If so, I am interested.

You'll definitely have reversion with that cam.

You don't need dry exhaust unless you have a very radical cam. But what you do need is an exhaust that mixes much closer to the outlet.

What type of exhaust? Have a link by chance?

Thanks all!

[Chris]

Stainless Marine is the best bang for the buck.

http://www.stainlessmarine.com/sbmanifold.htm

They'll make you custom tails to fit your exact application- for alot less $$ than you'd ever imagine they'd cost. They send the manifolds and a fit kit. You send the dimensions they ask for and the new tubes go out through the existing holes. If you get a chance, search on member TONY and look at his Cig 28. He did some pretty amazing tails on his.