What can you guys know about this boat
The specs say 11000 lbs is that possible in a pleasure
do blower motors fit with chillers
here are the specs on the motors how do they rate
and what about the drives the add says #4 ssm
Thread: Stillwaters 41
Results 1 to 4 of 4
-
- Join Date
- Jan 2010
- Posts
- 44
03-31-2013 02:45 PM
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,870
- Blog Entries
- 45
03-31-2013 06:20 PMThat boat is a 41 Apache which was once named Stillwaters I believe. I don't know if that's the name now. 11,000 lbs dry is certainly doable on a 41 Apache, I do not know the layup on this one.
#4's are okay, harder and harder to get parts for, but those look like number 5's to me with the spacer in the leg. Anyone know for sure by looks?
That boat used to run around the Sandusky area from what I recall, then went to New Jersey I think.
If you look up the United RAcing Engines website it will tell you about their latest variation of those motors. Give them a call if you're serious.Getting bad advice is unfortunate, taking bad advice is a Serious matter!!
-
- Join Date
- Jan 2010
- Posts
- 44
04-01-2013 10:54 AMI didn't notice that spacer thanks. I read some where that the boat originally had 3 0r 3a's then Mcmanus redid the boat and they put 4's.. and the add say's 4's. 3 to 4 probably explains the spacer right?
-
04-26-2013 12:18 PM
They are #4's. I've talked to the listing broker and Mark McManus about this boat. Obviously one of the boats that didn't get the #6 makeover.
People we meet in life are either a Blessing or a Lesson