In need of one Gen 4 oil pan.
Old one has rocker arm "blemish."
Thread: In need of one Gen 4 oil pan
Results 1 to 20 of 20
-
11-30-2009 01:14 PMWarning: This post may contain language unsuitable for minors or math not suitable for liberal-arts majors.
-
11-30-2009 02:19 PM
I have one. Alum with the fins. $100 plus shipping
email if your interested Mynova23@aol.com
-
-
12-04-2009 01:26 PM
Needing the full 8 quart pan like early 454s.
Warning: This post may contain language unsuitable for minors or math not suitable for liberal-arts majors.
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
12-04-2009 01:33 PMU deleted my help !!!!!!
Go to e-bay , not kidding u. 454 oilpans all over at that place.
CHEAP
-
12-04-2009 02:56 PMWarning: This post may contain language unsuitable for minors or math not suitable for liberal-arts majors.
-
12-04-2009 03:34 PM
Heres the pan number. GM 14097240
and the pickup GM 14103147
-
12-04-2009 03:37 PM
I have one of the steel 8qt pans ready to list on ebay. I just sold an aluminum one on there to a guy in Canada for 88bucks.
You can have this one for 75 plus shipping. I changed to 10qt pans this year.
-
-
12-05-2009 01:35 AM
old school long gen 4 aluminum I have two in the south building I think will look on saturday and take pics.Jet Connection Performance Marine 419 473 BOAT...peace
beer is food
-
-
-
12-05-2009 12:30 PM
Positive crankcase ventilation
-
12-17-2009 09:18 PM
Fund .... I have 2 of those pans ...... 150.00 Shipped....if interested I'll take some pics ... 8 quart 2 piece seal ......mike
-
-
12-18-2009 08:19 AM
Thanks for the posts guys, I'll do some pm's here shortly.
Warning: This post may contain language unsuitable for minors or math not suitable for liberal-arts majors.
-
12-19-2009 11:32 PM
Waited as long as I could Fund. Listed this afternoon and sold w/99.00 Buy it Now in about 8 -10 hrs.
Mark
-
12-20-2009 07:45 AM
Ok.
Warning: This post may contain language unsuitable for minors or math not suitable for liberal-arts majors.
-
12-20-2009 10:19 AM
I have two of the aluminum trays, all boxed up to ship to someone who never payed. They are in good shape will cut you a great deal <$50 ea.
-
12-20-2009 11:01 AM
Thanks very much. Would prefer the stamped steel/sheet metal one.
Warning: This post may contain language unsuitable for minors or math not suitable for liberal-arts majors.