got rev. no forward
Thread: lose forward bravo i drive????
Results 1 to 17 of 17
-
-
- Join Date
- Oct 2008
- Location
- Lake Travis Texas
- Posts
- 6,844
05-31-2010 11:26 PMCheck your magnets and shift cable.. See if it will shift when you take it off.
-
06-01-2010 08:43 AM
i took the cable off it is not that. i took the top plate and side plate off the slider lift the top gear but the bottom gear will not move ??
-
06-01-2010 09:42 AM
sounds like you blew a floor out. you need another drive bud? you are pushing alot of power to it. i have heard of the RH drives doing this. a gearset can cost almost as much as a drive somethimes though.
Now recruiting Mississippi power boaters.
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
-
06-01-2010 10:17 AMNow recruiting Mississippi power boaters.
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
-
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
-
- Join Date
- Oct 2008
- Location
- Lake Travis Texas
- Posts
- 6,844
06-01-2010 01:30 PM
-
-
06-02-2010 12:37 PM
you need a gearset. those can be pricy. you could find used. But i chose not to tackle it in my drive. i have setup many gearsets in vehicles and i understand how critical correct tools and measurements are to the longevity of the gearset. so without special tools i just bought a new drive. I still have my 1.36 drive sitting on a stand in my closet. if you like the 1.36 this one is in great working order and had the fluid changed about every other oil change. i was real easy on it. i just got another 1.5 drive that i am going to keep for a spare sooo you could possibly take this one off my hands. and i will break the drive down if you would just like the upper. best price i ever found on gears were a used set for $500.00 i have seen 1.36 gears for as low as 150.00 but also used.
Now recruiting Mississippi power boaters.
-
-
- Join Date
- Oct 2008
- Location
- Lake Travis Texas
- Posts
- 6,844
06-02-2010 01:57 PM
-
06-02-2010 02:11 PM
the forward gear went and it all fixi am installing friday
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
06-02-2010 02:11 PMI have some XR gears, but i think they don't fit ....Jim, u need some 1:36 XR's ( gears , 2 sets ) ????? Oh, CHEAP !!!!
-