This is a 24X 7 hull.
Now asking $12K FIRM. I will consider trades for a similar priced center console boat.
Engines are 1994 Merc 200 XRi. The starboard engine has a rebuilt power head done in 2006. Compression and leak tests done by Jaws Marine spring of 2008 were good. Mounted on hydraulic jack plate. The boat doesn't have hour meter, so I'm not sure the number of hours. I've only put on about 10 hours since I purchased last year.
New Teleflex throttle and shifter cables installed summer 2008. New hydraulic surge disk brakes installed on trailer spring 2008. New cockpit cover spring 2008.
Results 1 to 20 of 64
-
- Join Date
- Oct 2008
- Location
- Annapolis/Baltimore, MD
- Posts
- 89
10-20-2008 10:22 AMLast edited by Love Machine; 06-21-2009 at 12:13 PM. Reason: Price reduced to $12K on 6/21/09
-
- Join Date
- Oct 2008
- Location
- Annapolis/Baltimore, MD
- Posts
- 89
11-17-2008 08:24 PMShe's shrink wrapped and tucked away for the season. I'll revive this listing in March.
-
-
- Join Date
- Oct 2008
- Location
- Annapolis/Baltimore, MD
- Posts
- 89
12-04-2008 09:23 AMPics...
-
- Join Date
- Oct 2008
- Location
- Annapolis/Baltimore, MD
- Posts
- 89
12-04-2008 09:25 AM...
-
- Join Date
- Oct 2008
- Location
- Annapolis/Baltimore, MD
- Posts
- 89
12-04-2008 09:28 AMmore...
-
12-04-2008 09:32 AM
How well does that boat run ( speed at wot and cruise) Really cool boat buy the way...
Still searching for the ultimate old school project....
-
- Join Date
- Oct 2008
- Location
- Annapolis/Baltimore, MD
- Posts
- 89
12-04-2008 05:52 PMThe boat runs awesome. Cruises in the 50s (two adults and two kids) and tops out in the upper 60s (one adult). Pantera built it to run in the mid 70s with this engine set up and racing props. Of course, the engines have a little age now but run strong.
-
- Join Date
- Oct 2008
- Location
- Annapolis/Baltimore, MD
- Posts
- 89
03-31-2009 07:38 PMIt's spring time and I've just been laid off from Sprint. Time to sell this Pantera fast. I will consider all offers.
-
04-02-2009 08:09 PM
What size mids are those? What size props and what rpm are you turning them?
-
- Join Date
- Oct 2008
- Location
- Annapolis/Baltimore, MD
- Posts
- 89
04-03-2009 05:26 PMDumb question. What's a mid?
-
04-03-2009 09:54 PM
oops, sorry. Mid-section (probably 20" or 25")
-
- Join Date
- Oct 2008
- Location
- Annapolis/Baltimore, MD
- Posts
- 89
04-10-2009 11:22 AMThe boat including engines are shrink wrapped at the moment. Once I take it off I'll measure the mids and let you know prop size.
-
- Join Date
- Oct 2008
- Location
- Annapolis/Baltimore, MD
- Posts
- 89
05-12-2009 05:34 PMThe shrink wrap is off and the boat is ready for the season.
-
05-12-2009 05:41 PM
whats the length of the boat? or did i miss it in the ad somewhere?/
-
05-12-2009 05:41 PM
Just dropped you a PM with a code for the classified section
"Keep the bottle on the bar Ira, I won't be long".
-
-
05-12-2009 06:15 PM
Hey Tim, can you loan me 17 grand?
-
-