I'm new around here, but I lurk...A LOT.
I am looking for good way to plug some holes in the stringers from the old batteryboxes. I want to make sure they are sealed and protected from any water intrusion.
Also - is there any tips for making sure the new holes are sealed before the new bolts go in?
Thanks for any help or advise
Thread: Plugging old holes in stringers
Results 1 to 9 of 9
-
12-04-2008 09:57 PM
-
12-04-2008 10:07 PM
Welcome aboard. How big are the holes? And what kind if boat is it? West Systems 404 is great for filling larger type screw holes.
Throttles- Cleveland Construction/Traffic Light Racing 377 Talon cat
-
12-04-2008 10:31 PM
just something i have done over the years and that is fill the holes in with epoxy putty mixed with capasill which is a thickining agent , sand or lightly grind the hole and the perimeter and put a few layers of chezze cloth on it , or what some people call finish fabric .
-
12-04-2008 10:33 PM
yep but get a big syringe and squit some of the unthinkened epoxy in the hole first, it will soak into the pours of the wood and give a little better penetration
P-4077 "The Swamp" S.B.Y.C. and Michigan medboat mothership
-
12-05-2008 12:43 AM
Holes are approximately .500" - Boat is 1988 Cigarette Bullet
Are these items I can find...?
-
12-05-2008 12:46 AM
any west marine should have it
P-4077 "The Swamp" S.B.Y.C. and Michigan medboat mothership
-
12-05-2008 12:47 AM
I just saw your in cleveland, is the boat inside or outside? PM me your number and I can explain it or I have some free time comming up in about 2 weeks..
P-4077 "The Swamp" S.B.Y.C. and Michigan medboat mothership
-
- Join Date
- Oct 2008
- Location
- Lake Travis Texas
- Posts
- 6,844
12-05-2008 01:01 AMAnother way given the holes are 1/2 inch is to epoxy in a wooden dowel. Under size just enough to cap ends with a thicken mix of epoxy.
New holes. if water will lay against holes use 5200. If not any basic caulk will work.
-
12-05-2008 09:49 AM
Thanks for the help...everyone I appreciate the responses.
PM sent