Thread: New Intercoolers
Results 81 to 100 of 167
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,877
- Blog Entries
- 45
06-12-2011 11:21 AMGetting bad advice is unfortunate, taking bad advice is a Serious matter!!
-
06-12-2011 01:50 PM
1547hp @ 6800 and 1329ft/lbs @ 4900 in the vid.
Previously, we have made 1570hp @ 6800 and 1380ft/lbs @ 4600, but that was a bit different tuneup as far as timing and AF goes.
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,877
- Blog Entries
- 45
-
06-12-2011 04:26 PM
LOL, there is still alot left on the table with this blower and intercooler combo. Keep in mind, these numbers were achieved using carbs, msd distributor, crane ignition, standard blower intake and 23* heads, all while keeping the intake temps under 100*F with only 10gpm of flow through the intercooler.
-
-
- Join Date
- Jan 2009
- Location
- SE PA
- Posts
- 43
-
-
-
-
-
06-24-2011 02:24 AM
Here are some new waterpickups we built so that the new intercoolers can get enough water. We should have them back from the welding shop mid next week, and then give them a quick touch up polish. Also, the first inch or so of the pickup has been expanded so you can put different length pipe inserts in there to adjust the height of your pickup.
Last edited by Coolerman; 06-24-2011 at 02:30 AM.
-
-
06-24-2011 01:31 PM
coat hooks, right?
-
-
-
-
08-24-2011 12:09 AM
locked and loaded for loto
-
- Join Date
- Jan 2009
- Location
- SE PA
- Posts
- 43
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,877
- Blog Entries
- 45
08-24-2011 07:09 AMGood luck guys. I'm really rooting for the King's of the BT'rs to show everyone the way.......
Really wish we could be down there for this one. Unfortunately Terri has a business event this weekend there is no way out of. I'll be watching on the internet. Tell "Dad" no early cutout's........Getting bad advice is unfortunate, taking bad advice is a Serious matter!!
-