the 28' is a powerplay mold?
Thread: 33' Powerplay Center Console
Results 61 to 80 of 84
-
- Join Date
- Nov 2008
- Location
- ft.myers
- Posts
- 187
03-03-2010 01:49 PM
-
03-03-2010 02:01 PMSlippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
- Join Date
- Feb 2010
- Posts
- 48
-
03-03-2010 02:46 PMSlippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
03-03-2010 03:55 PM
Here is a profile pic of the boat
-
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
-
03-03-2010 06:50 PM
I had a thread going once upon a time on the other site called "Dans picture stash" or something like that and was posting until it got hit by the Azzhats and I stopped.
Chris Yes every bit of that operation very well documented by photos, Danny was very careful about photographing everything built there ,1000's upon 1000's of very cool photos.Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
03-03-2010 06:55 PM
I love the way the name PowerPlay came about........Dan was the chitzzz
-
-
- Join Date
- Nov 2008
- Location
- ft.myers
- Posts
- 187
-
03-03-2010 07:54 PMSlippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
03-03-2010 11:05 PM
northernoffshore,
Sorry didn't catch onto the question until you posted the photo of the 28' Latitude. The 28' Latitude does not have any affiliation to the former 28' Powerplay. I believe the 25' and 28' Powerplay molds were purchased by someone else during the sale.
-
03-03-2010 11:12 PM
There was no 28' PP mold that was a done with a dam insert in the PP Cobra Mold.
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
- Join Date
- Jun 2009
- Posts
- 1,514
-
-
03-04-2010 09:49 AM
No, there was an removable insert made for building his 28; The plug was finished to Danny's standard and inspected by him, this was placed in the mold with the finished side facing the transom,Then it and the remaining bottom along with the transom and cutting flange of the mold were Gelcoated with tooling gelcoat and laminated like to a mold thickness.
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
03-04-2010 09:51 AMSlippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
-
03-04-2010 03:43 PM
[QUOTE=Steve 1;451390]I know who does and will try to get PP Photos posted in a thread of it's own.[/QUOT
Thank You