What do you guys use? a gauge (s) or something handheld?
I was looking at http://cgi.ebay.com/ebaymotors/AEM-U...#ht_4466wt_960
but it doesn`t say how long the harness is....
Thread: AFR wide band
Results 1 to 9 of 9
-
07-19-2011 08:09 PM
-
- Join Date
- Oct 2008
- Location
- Georgetown, TX
- Posts
- 426
07-19-2011 08:47 PMI use the FAST dual sensor handheld.
Boat-less...
-
07-19-2011 09:11 PM
Dan,
I use the innovate lm-2 handheld... works great! Probably will have it with me this weekend taking readings... if you wanna check it out..
-
07-21-2011 12:20 AM
Todd, I wouldn't mind seeing that.
Dan-what are you fiddlin with now? You still have the mefi's you can't get into right?
-
07-21-2011 05:18 AM
Innovate and Fast make nice units from what Im told. Fast dual channel is about 400 bucks or so I think.
-
07-21-2011 08:43 AM
Yes Todd you can install it in my boat!
I`ve heard Innovate is troublesome, fast is more than I wanna spend but is nice.
Paul, my oil on Starboard side gets dirty pretty fast and I think it`s running too rich just wanna see where those motors are at since they were only dyno tuned.
-
-
- Join Date
- Dec 2010
- Posts
- 33
10-10-2011 05:06 PMHow do these hook up? Anybody got any pics? Do they just go on the end of the exhaust? The last A/F ratio meter I used was on a car and it hooked into the O2 sensor. My boat is carbed and definately no O2 sensor so I would like to try and tune it with a A/F meter but don't really know how to hook it up or which is best.
-
10-10-2011 09:40 PM
i use the m-1Innovate they are cheaper and work real good. i had my motors dyno and had to change the jets because of the headers. and i think its best to check it on the boat thats the real dyno my a/fs were in the 11 to rich now they are 12.7 and wot 12.5 got more top end the m-2 had some problems thats why i got the m-1 does less but works great for what i need