Thread: Winter Projects
Results 381 to 400 of 489
-
-
-
-
05-20-2011 05:40 PM
I am hoping I can get on plane still pretty easy with these and I spin them as they are 5800-6000ish. Will probably try a little test run on Pine this weekend if we don't get rained out again.
If they don't work, they will have to go to BBlades for a little tweaking.
-
- Join Date
- Nov 2008
- Posts
- 115
-
-
05-21-2011 12:22 PM
If cleaning the boat counts as a winter polrject then I am almost done...LOL
-
05-21-2011 11:45 PM
Only counts if you did the cleaning
-
-
05-22-2011 08:44 AM
Looks like a day to get out and do some water testing on the big pond Reeves. Slap that hatch on and go for it! Maybe next weekend i will be able to go for a shakedown run and try out the new blowers and props.
-
-
- Join Date
- Nov 2008
- Posts
- 115
05-22-2011 08:12 PMNext weekend is memorial day? Dam I'd better start my winter project or before I know it summer will be over. All the friends kept me busy when there was actually snow on the ground now its getting to go time and I almost forgot I have a boat. I'd better get busy!:bump
-
05-22-2011 08:16 PM
Todd...we'll be testing up in Holland with Dave. Depending on the day (hopefully it'll be Saturday or Sunday), we'll be in the west coast of MI. In the meantime, we'll be at my parent's place in Coloma, so either way, I'll be in touch.
-
05-23-2011 09:58 AM
Got my dash wired yesterday. What a P.I.T.A. It would have been real nice if whoever wired the dash used the proper wire colors, rather than splicing and using BLACK for almost everything!! WTF where they thinking. Nothing was color coded properly, so i pretty much had to disassemble the harness and go from scratch. But, it is looking nice back mounted in the boat. 420NYTROBOY keith came to help yesterday. Got his first lesson in changing gear oil, blower oil, dash wiring, some other misc boat work.
-
05-23-2011 12:45 PM
Ah, you guys are making me tired listening to all the work you are doing on the boats. LMAO I just can't get motivated enough to go to the shop and clean the boat, much less anything else.
Now watch, I'll probably have to change the battery's or something. Geesh.
-
05-24-2011 10:29 AM
Engine hatch is on....a big thanks to Craig (Wette Vette) for all of his help through this project! Also a big thanks to Bryce for not only helping but letting me use the B&E A - frame! Stroud....thanks for the help with the hatch last night!
-
-
05-24-2011 10:51 AM
Picked up some Bravo 30s to test this weekend from Airmarine yesterday. Will HOPEFULLY get my drives back from Big D today. Spoke to Dave Saturday, he was finishing up the wiring harness on the second motor and making braided stainless oil lines...motors are supposed to be going in as I type. Holland should be hearing the red hot sommer this weekend...
-
-
- Join Date
- Nov 2008
- Posts
- 115