Still the best big water riding Boat. Both the 41' and 47' original Apache molds have been completely restored. We can build a bare hull and deck, a complete running boat or anything in between. Made from modern composites with a balsa core or old school Kevlar and wood. We can also engineer steps into them if you would like. www.saberboats.com. PM me or call at 989-233-0878 for info.
Pat Doyle
http://www.youtube.com/watch?v=kyR_ptdLh7M
41 in action! Check it out.
Results 1 to 20 of 42
-
03-02-2011 10:26 PM
-
03-02-2011 11:11 PM
So Pat , help me read between the lines if you will ........ Pat are you stating that you now ......are the new owner of the old Sabre mold's that were originally the old 41/47 Apache molds that Sabre owned considering your location is Bay City Mich with a 989 area code and are you actually building the boats in Bay City Mich or are the boats still being built at Sabre & you are somewhat of spokes person for Sabre marine and Doug G ? Hey guy , does that now mean that boats are going to be built using all composites such as Epoxy ,S&E Glass , Carbon Fiber , Kevlar , along with being vacumed bagged ? Pat to tell you the truth when you talk about old school Kevlar i do not understand just what you are really trying to say because no matter which way you look at it Kevlar is a very pricey fabric with only a few Boat Co's using it in there build .
-
- Join Date
- Oct 2008
- Location
- Lake Travis Texas
- Posts
- 6,844
03-03-2011 12:27 AMHe states Modern OR old school.
-
- Join Date
- Jan 2011
- Posts
- 677
03-03-2011 02:00 AMHow much $ would a 41 hull and deck, ready for rigging be? I am thinking modern foamcore with Kevlar and solid wood transom, covergirl cabin and full staggered 6 pack with 6 fuel cells. 2 of them in the center of the cabin under the floor.
-
03-03-2011 06:46 AM
Spring must be coming
-
-
03-03-2011 10:30 AM
No need to read between any lines. I work with Doug. Saber is still in Grand Rapids and I live in Bay City. This post here is just to point out for those who don't know that we have the Apache molds. Saber is a custom builder and able to use most any process and materials.
-
-
03-03-2011 10:37 AM
Cool videos
Cool rigs
Saber is down by Turner and Ann Street now, right?
Just watched the Eliminator "Viper" boat stuffing video too.
BoatMe, you got some COOL stuff there ! ! !Last edited by rschap1; 03-03-2011 at 10:42 AM.
-
-
03-03-2011 11:16 AM
Since this is the Apache manufacturer section, I'll hazard an Apache question: who's 41 and 47 molds does Mark McManus have?
He still makes splashes of Apaches too, I think.
-
-
- Join Date
- Jan 2011
- Posts
- 677
-
-
03-04-2011 08:13 PM
You make a good point. But hey, we are in the Apache section. I remember that now. I did know that Saber 41s and Apache 41s were siblings. (photo below) It's been a few years since I heard the story I guess. So, I have to assume that the current Apache brand is new molds.
Here's an Apache 41 and a Saber running together. This is a very special pic that a guy on Lake Erie took. The Chief is the Apache. The red boat is the Saber named Clifford. That's Jerry's boat and he was a beloved guy who passed away last year. Many people knew him and that boat and miss him sorely. This was fall of 2008, I think.
-
- Join Date
- Jan 2011
- Posts
- 677
-
-
-
03-05-2011 08:09 AM
Don built the 41 for Ben and Bobby, Mark Mc Manus built the 36 mold for Bobby. There all great boats, 21,24,28,36,41,45,47.And KEMOSABE 47 is the best one.
-
03-05-2011 08:26 AM
Saber are also great boats, I have been in some huge waves in Parn's 41 and the last Smoke on the water run in Jerrys they ride sweet, I miss him a ton.