finally pulled my chit box apart today Confirmed what I thought.But was not expecting this much carnage..
I now have a custom 2 piece crank Several twizzlers that once were connecting rods some new paper weights from SRP and enough metal im my pan to get a 2 dolla bill..
So looks like I may be getting bigger pistons better rods,stroke it out and hell why not a new cam.. Other than that all looks good.
Thread: The verdict is in
Results 1 to 20 of 24
-
08-01-2010 10:38 PMSOS NINJA dancing on the boundaries of hell.
-
08-01-2010 11:55 PM
Sorry about the carnage but I like your spirit.
-
-
08-02-2010 09:59 AM
some very expensive looking garbage...
People we meet in life are either a Blessing or a Lesson
-
08-02-2010 08:11 PM
Good luck with your new project.
-
08-02-2010 08:43 PM
Wow, nice job! Interesting conversation pieces now!
-
08-02-2010 08:47 PM
Nice job. Those paper weights look like speed pro's not SRP.
-
08-02-2010 08:54 PM
Loosing and engine always sucks! Hows the block? any damage? When rebuilding an engine it always pays off to get the good stuff.
-
-
08-02-2010 08:58 PM
Isn't that a seal Power emblem on the side of that piston?
-
08-02-2010 10:00 PM
cant decide what I want to do with the engine. rebiuld stock or stroke it. Guess I have all winter to decide not going to rush into it and not use it
SOS NINJA dancing on the boundaries of hell.
-
-
- Join Date
- Nov 2009
- Location
- houston,TX / jackson,MS
- Posts
- 42
08-02-2010 10:42 PMStroke that baby!
-
-
08-02-2010 11:23 PMSOS NINJA dancing on the boundaries of hell.
-
08-02-2010 11:27 PM
Ok so lets make this fun.
What parts(combo) would you do.
I am going to keep the same heads(ZZ502 Aluminum)and the BG 830 carb.Everything else can be changed.
So lets hear it but lets not get crazy as I do have to keep some sort of budgetSOS NINJA dancing on the boundaries of hell.
-
08-03-2010 06:32 PM
Are those oval port heads?
-
-
08-03-2010 10:31 PM
The short block is the easy way, I've seen too many remans,& short blocks that are thrown together and end up out of speck. I once purchased a brand new 454 long block, still had the tonawanda factory tag hanging on it. Pulled it down to balance and blue print and was amased at how far out of spec it was.
-