Ok still have a lot to learn. On our SS7M with TRS and 502 Mag MPI what prop would you suggest?
Thread: What Prop?
Results 1 to 8 of 8
-
- Join Date
- Aug 2009
- Location
- SW Ohio
- Posts
- 31
05-21-2010 03:54 PM
-
05-21-2010 04:48 PM
You can also ask this question in the prop tech section !
Parabellum FJ²B
-
05-22-2010 06:19 AM
do you happen to know your x dimension or propshaft depth?
helps a lot to close in on what prop would work well for you
-
- Join Date
- Aug 2009
- Location
- SW Ohio
- Posts
- 31
05-24-2010 07:49 AMIs there a formula for X dimesnsion? and how to figure prop shaft depth?
-
05-24-2010 09:30 AM
measure the distance from the center of the boat bottom to the prop shaft centerline.
-
- Join Date
- Jun 2009
- Posts
- 1,514
05-24-2010 10:47 AMAlso going to need to know what prop your running now, and RPM. If youdont have that info, I would start somewhere around 24 for a 4 blade, 25 for a three blade with that motor/drive combo.
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
05-24-2010 11:49 AMI say a 24 HYDROMOTIVE 4 blade is your best bet !
-
05-25-2010 07:59 PM
I agree start with a 24 / 4 blade
AKA - "Pantera24" on OSO
1981 Pantera Sport 24' "FactorX"