Dave Artie Here is a cut job I did, they had a Cat with the steps in the last quarter of the boat, the thing was dragging the keels and ran however it pleased,I cut 5 feet out of the middle from the front step foreward.
The now shortened front was cut in the chine and sides flared open to match the geometery of the aft section and a piece of steel was bent around it through bolted with all thread bolts that way if a nut got resintited the outer nut would release it.
Those pieces on the sides are 2" steel channel.
Results 1,041 to 1,060 of 1668
-
04-14-2010 02:43 PMSlippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 02:49 PMThrottles- Cleveland Construction/Traffic Light Racing 377 Talon cat
-
04-14-2010 02:54 PMSlippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 03:06 PM
Another picture you can see how we cut this thing and matched up the joint.There is the piece I cut out just put a pair of transom eyes on it and lifted the section out.
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 03:22 PM
Steve just wondering i notice there are no strakes or was the boat designed to get its lift from the pads only ,or were the strakes added later ?
-
04-14-2010 03:31 PM
Last edited by Steve 1; 04-14-2010 at 10:31 PM.
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 10:33 PM
That boat is in one of the vids as the committee boat when we finished, I took a Pilot house and cut it away on the back for it.
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 11:17 PM
This Deck Mold was the last piece I built for Danny It was a lot of work in those days but I miss that place.I will throw a few pictures in.
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 11:19 PM
Diesel with two speed transmissions and arnesons I heard 81 MPH
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 11:21 PMSlippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 11:23 PM
Here is the 38 Yanmar boat.
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 11:25 PM
Cobra Powered 38 PP
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 11:27 PM
Another
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 11:28 PM
Some engine room pictures of the 38's that is lonseal under the batteries
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 11:31 PM
More Rigging
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 11:32 PM
Picture of that material.
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 11:34 PM
Outboards
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 11:38 PM
Poker run
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 11:39 PM
Hotboat
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 11:40 PM
Eikerts
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.