Dave Artie ,Here is how that mold system worked the stringers were done then the Bulkheads were placed inside laying down, the deck mold with the finished part was then placed on the hull mold (the cutting flanges were "Keyed") then 360 glass, the bulkheads were then stood in place and glassed in then the deck mold was removed as shown here.
That new Sport deck would just be done in the same manner with the molds flange to flange glassed then demolded.
Results 1,021 to 1,040 of 1668
-
04-12-2010 12:51 PMSlippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-12-2010 01:26 PM
Steve1 i tried PM you but it says you can't recieve. PM your e-mail
-
04-12-2010 01:27 PMSlippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-12-2010 08:02 PM
This Cheetahcat I am getting ready for lamination had a folded pad and a tunnel that was a little different. I was doing some wet bagging that choppergun had a roll of Carbon fiber tow on it.This boat was to get Navy style S-Glass not S-2.
Last edited by Steve 1; 04-13-2010 at 06:50 PM.
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-13-2010 10:37 AM
Dave How are you doing with the Vacuum system?
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-13-2010 03:25 PM
Here is a full tunnel on a pleasure boat this goes with a post I made on the New Cheetahcat thread.
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-13-2010 04:06 PMThrottles- Cleveland Construction/Traffic Light Racing 377 Talon cat
-
04-13-2010 04:18 PMSlippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-13-2010 05:56 PM
same here, been getting two quart paint pots from Harbor Freight and stripping them down to work as a trap. Work great and i think the last one was under twenty bucks. I have been pretty good about keeping waste in the bleeder ply and out of the lines. Got a real nice filter and oil mist eliminator for this one.
Hey whats a gas ballast? Do i need that? ThanksThrottles- Cleveland Construction/Traffic Light Racing 377 Talon cat
-
04-13-2010 06:03 PMSlippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-13-2010 06:20 PM
I have a KRYPTON Infusion system where large diameter feeds are used,I spiral cut cheap PVC and just use plastic valves instead of pinching the feeds off and we use a single common feed Reservoir instead of a half dozen or more buckets all sitting around the work,also I can shut one trap out of the system and drain it into the feed bucked if needed.
The first ones I made out of cheapo Speedaire 2.5 gallon pressure pots I bought from the pawn ,shop Knocked some holes with a hole saw in the lid for the PVC and they worked great. A roll of tacky tape does wonders.Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-13-2010 07:01 PM
no way! . . . . because i pawned some of those years ago to buy good ones
Just kidding lol
I like the large feed lines i see you using. I have mostly used the clear half inch tubing with the small system. Think i may hafta step it up for this larger pump.Throttles- Cleveland Construction/Traffic Light Racing 377 Talon cat
-
04-13-2010 07:12 PMSlippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
-
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
- Join Date
- Feb 2010
- Posts
- 14
04-13-2010 08:43 PMCurious what would happen if the bow "nipple" were larger to the packing of air.
Help me out here. Wouldn't it be less air in the tunnel? Or would it make it more left to right
-
04-14-2010 12:04 AM
Dave keep us updated that is a beautiful pump.
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
04-14-2010 12:56 PM
Dave here is a Regulator (lower Arrow) the upper is a wall mounted vacuum gauge in PSI that I found in some Iraqi stolen booty ,the entire shop has a large pipe going around it with drops about every 12-16 feet or so. The way I had that system is the regulator could be shut out of the system with a valve.
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.