That's a good plan on the piping. What about the inducer are you guys going to run just a screen on the front? Or just chew up the zip ties as they show up from the fourth dimension.
What kind of bracing for the turbos do you have as support for the big water?
Real nice looking set up Brad and Tyson.
Thread: Twin turbo engines
Results 21 to 40 of 82
-
04-10-2010 09:36 PMForget Lightspeed go straight to LUDICROUS SPEED!!
-
-
- Join Date
- Oct 2008
- Posts
- 63
04-10-2010 10:10 PMThe turbos are definately like a really powerful vacume cleaner so they will definately suck anything left in the engine compartment, the good thing is with the speed they turn anything that goes into them is turned into dust.. We never had any problems with my turbos eating something so this one should not either. But we have built a screen for them but mainly just for when were working on them, while it's running so you don't get your fingers in them.
There is a brace that goes straight down from the bottom of the turbos to the bellhousing to hold the weight in the rough water, I will take a pic of it when I go back over there.
-
04-10-2010 11:10 PM
If I can be a little nosy, got a few questions:
1. CID
2. Compression ratio
3. Boost
4. RPM redline of motor
-
04-10-2010 11:17 PM
can you get another picture of the charge tube.... I am not understanding how it is plumbed?? BTW they look incredible... are they for the 388?
-
- Join Date
- Oct 2008
- Posts
- 63
-
-
- Join Date
- Oct 2008
- Posts
- 63
04-11-2010 12:38 AMThe charge tubes come out of the turbo and hug the block and go under the oilpan and forward towards the firewall there they go through the intercooler and come back into the throttlebody. No they are not in the pic because they will be mounted to the intercooler in the boat.. We will have temporary ones for dynoing.
-
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
-
04-11-2010 03:54 AM
Pretty cool there stud!!!!
God forgives.....The 1% doesn't!!!!!!
-
-
04-11-2010 12:39 PM
What do the two supercharger like scoops at the top do?
-
- Join Date
- Oct 2008
- Posts
- 63
-
-
- Join Date
- Oct 2008
- Posts
- 63
04-11-2010 02:09 PMNo it's not spread bore., I know there is a small space for the gasket to seal but I have ran 632 with twin turbo since 2002 in my boat up to 30 psi ( accidentally) and we never blew a head gasket. Normally when people blow head gaskets between tight bores they did something else wrong that caused it.
Last edited by Bigyellowcat; 04-11-2010 at 02:18 PM.
-
- Join Date
- Feb 2009
- Location
- E Dock & Bartlesville OK
- Posts
- 51
-
04-11-2010 09:50 PM
seriously boss man......
-
04-11-2010 09:54 PM
If only the Direct TV worked on the Carver.....
They look great!VP of Operations, GLOC's Fastest Pontoon 2009
-
04-12-2010 06:00 AM
Those are just too nice! You could put them in the living room & use em for coffee tables.
Support offshore racing!
http://www.facebook.com/pages/Baylin...1780188?ref=nf