Need a thermostat housing with bypass for a 454 and tail pipes for CMI E-TOPS, bravo setup.
Thread: need therm housing and tailpipes
Results 1 to 6 of 6
-
- Join Date
- Nov 2008
- Posts
- 30
04-07-2010 05:59 AM
-
04-07-2010 07:40 AM
I have a t stat housing take off from a 500efi less the brass T fitting. freshwater only.
Part numbers : 849927T1 and the cover number : 47441A1 Not including the T number : 22-98477A2Last edited by Airpacker; 04-07-2010 at 07:48 AM.
-
- Join Date
- Oct 2008
- Posts
- 2,001
04-07-2010 08:21 AMI have switchable tails for those CMI's that need to be rebuilt (they sell a kit to replace bushings and seals) . No pump or rams for the system though.
-
04-07-2010 09:38 AM
What kind of tails? Rope seal, Merc 500 efi or Flex-flare? I have a set of 500efi tails but will only sell them with the headers clamps etc. $1500, and I have a set of rope seal tails dry to the tip for $150.
Last edited by Trim'd Up; 04-07-2010 at 09:59 AM.
-
- Join Date
- Oct 2008
- Posts
- 2,001
04-07-2010 09:41 AMMerc 500 EFI, also have the headers.
-
- Join Date
- Nov 2008
- Posts
- 30
04-08-2010 09:54 AMdon't need a stock housing. it's for a crossover. pipes are the flex-flair.