I blew a hose today. Looked at Bam, CP and Rexmar and did not find replacement. Where can I find a couple of these new?
Results 1 to 13 of 13
-
03-20-2010 10:48 PM
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
-
03-21-2010 05:59 AM
i've always had them made at a local industrial hose supplier. most places can whip them up while you wait.
Throttles- Cleveland Construction/Traffic Light Racing 377 Talon cat
-
03-21-2010 06:31 AM
by the looks of that hose, you might consider changing the rest while your at it. just a thought,!!
IMCO #10- 2009 National Champions
-
- Join Date
- Feb 2009
- Location
- Winneconne Wi
- Posts
- 35
03-21-2010 07:56 AMhttp://www.mercruiserparts.com/Show_...F+846215A02%29
14 32-845975 ----HOSE, Hydraulic (9.375 Inches) $36.74
-
03-21-2010 02:59 PM
Thank you for the info! Theres a hydraulic shop close to my office. I'll give them a chance first. Two of the four hoses are perfect, the other two looked like the one pictured.
-
-
03-23-2010 01:23 PM
My local hydraulic supplier quoted me $2.70/foot for the hose and $13.20 per fitting, installed. That was with regular unshielded dash 3 stainless line. For another $8.31 plus shipping, I could buy the Mercury part with clear heatshrink on it. I bought local.
-
03-23-2010 07:34 PM
Parker makes the PTH-3 hose that is braided with the protective cover. But its the fittings that are killer, unless you buy in bulk they are about $25 a piece.
-
03-23-2010 09:45 PM
My local hydraulic shop did not carry any fittings that small. After Slowride posted the part number the best price I found was $31 plus freight.
-
03-24-2010 08:33 PM
Call Doller Offshore, ask for Mindi or Dana. I had my local hydraulic shop make up a set that leaked and had rusted ends after one weekend of freshwater use. Ive had Doller's on the boat for close to ten years with zero problems. They were double flared SS ends with plastic coated braided SS hose. At the time they were supprisingly cheap for what they were.
Last edited by Tony; 03-24-2010 at 08:38 PM.
-
03-25-2010 04:00 PM
I called Doller today, they had every siingle part I asked for in-stock. Hoses, tail O ring seal for TRS, transmission gasket for TRS, seal kit for TRS, solenoid for K plane, impeller and gasket for Sea pump. Prices were on track, not high or low, shipping was reasonable. Parts are on the way.
-
03-25-2010 09:23 PM
They are great people to deal with, Dana worked her ass off this summer straightening out a mis packaged part (from Merc) that Merc wanted me to pound sand on.