I have a Nordic Thor Cat with a few rockers in the hull would like to find someone in the GA area that can help me resolve this and Blueprint the rear 3 feet of the hull. I will drive for someone good out of state.
Results 1 to 12 of 12
-
11-30-2008 09:54 AM
-
- Join Date
- Oct 2008
- Location
- south carolina
- Posts
- 81
12-14-2008 02:14 PMcall nick , goes by ultimate cat on another board , he is down on the west coast of florida
813-417-6424
-
12-14-2008 02:33 PM
Just curious have you taken a straight edge to the bottom of the boat ? I have to say that if you have a hook it should be a concern for the pure fact you will scrap some speed and if it is a rocker i would let it be . I also would like to say that when i worked at Skater and did most of the bottoms on the 46 's adding a new pad and blueprinting of hulls on fountains which we built at one time , a rocker was acceptable .
-
12-14-2008 02:43 PM
We can help you but it'll be a couple of months.
-
12-14-2008 06:51 PM
Be careful I have seen boats slow down after the bottom was straightened! There is a lot to consider one being; HOW bad is the hook?
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
-
12-14-2008 09:45 PM
Hi Ginger myself I have seen 6 mph increases and then unhappy faces when the net increase was an expensive zero. I was looking for the same info also but explaining why is all.
Slippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
12-15-2008 12:18 AM
Steve to my friends it is Artie and might i say we most likely are two old farts who are in the wrong business and most likely could have made a lot more money doing something else if it wasn't for the love of the sport , boats , ext ext . Take care my friend and nice to meet you . G G /AKA / OFFSHORE GINGER /Artie
-
12-15-2008 07:49 AMSlippery when wet. PODLESS TUNNEL www.cheetahcat.com ,Repairs, Modifications and Truing Cheap reliable speed.
-
- Join Date
- Oct 2008
- Posts
- 907
-
-
01-08-2009 10:28 AM
I know of a guy in Houston that does excellent work. I can obtain his name/number if you want to go that far.
Brian Tillett; Active Thunder Factory Representative
wwwActiveThunderBoats.com
brian(a)activethunderboats.com