I am looking for a mirror that goes in my cuddy. I have a 1996 27' Fountain and when i purchased the boat it was missing a mirror in the cuddy. The size is 12"X13". If anyone can help me please email me or call me. Clay@tylercase.com or 513-262-6827
I attached a picture of the other mirror.
Thanks everyone
Thread: Need a mirror
Results 1 to 9 of 9
-
- Join Date
- Oct 2009
- Posts
- 21
10-20-2009 08:12 PM
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
10-20-2009 08:22 PMU can get one cut lokal,,for about 40 bucks !!!!!!
Just find a glass store.
-
- Join Date
- Oct 2009
- Posts
- 21
10-20-2009 08:40 PM^^^^^^ What about the frame to match the existing mirror?
-
10-20-2009 08:46 PM
yep, you should be able to get a peice of glass mirror or acrylic mirror cut to size local pretty cheap.
P-4077 "The Swamp" S.B.Y.C. and Michigan medboat mothership
-
10-20-2009 08:47 PM
heck before you put it in, you can probably have a design masked and sand blasted pretty cheap too....
P-4077 "The Swamp" S.B.Y.C. and Michigan medboat mothership
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
-
- Join Date
- Oct 2009
- Posts
- 21
10-20-2009 08:53 PMYeah your right Daredevil.... I can make one for sure, i didnt know if their was a place i could pick one up for cheap or if someone on here that was wanting to get rid of one. Thanks.
-
- Join Date
- Nov 2008
- Location
- Where the summer never ends
- Posts
- 4,346
-
10-20-2009 11:23 PM
You should be able to put that together in about two hours in the garage - in between walks to the beer fridge
Less than $50 in materials and supplies.
I'm not bagging on you, at all. Trust me, if you saw the scale of some of our projects on here just in an effort to put them back in the water, I would welcome this one as a "puttering in the garage" couple hour, 6-pack project (I drink quickly), and most of my projects require a 30-pack, and several days... Or years in this case.
Rob's idea of sandblasting a design is a good one. If you have access to a sandblaster, this is very simple to do. I've done several things like this in the past, and it can make for a very cool personalized look.
Maybe etch the bird into it."Keep the bottle on the bar Ira, I won't be long".