Results 21 to 40 of 42
-
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,870
- Blog Entries
- 45
-
-
- Join Date
- Oct 2008
- Location
- Appleton, Wisconsin. Where we have 2 seasons... winter and road construction
- Posts
- 4,120
05-24-2009 12:43 PM
You must have missed my thread on all these Merc manuals
http://www.seriousoffshore.com/forum...ead.php?t=6879•_•_•_▬_▬_▬_•_•_•
-
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,870
- Blog Entries
- 45
-
-
05-24-2009 02:14 PM
Wicked awesome.
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,870
- Blog Entries
- 45
-
05-25-2009 08:51 AM
Thanks again you guys.
The info that was shared with me yesterday was very helpful.
-
06-18-2009 08:12 AM
I had a hose once that the stainless bend before the flarenut connection at the ram split. res got milky and I didn't find it til the hose started leaking a couple weeks later. Just a thought to check the hoses and fittings real good.
-
06-20-2009 06:46 AM
Ok, an update:
I got a chance to pull the resevoirs off of the pumps and found that in boths cases, the filters had disintegrated and become part of a light colored goo at the bottom of the res.
In one case.... the filter is half gone. WTF?? can you buy the filter as a separate part number? About the size of a nickel.
Also... aren't there supposed to be filters on both sides? The pdf that Paul provided shows two filters.
Thanks.
-
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,870
- Blog Entries
- 45
06-20-2009 02:49 PMGetting bad advice is unfortunate, taking bad advice is a Serious matter!!
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,870
- Blog Entries
- 45
06-20-2009 03:30 PMJust tryin to help, I'm real curious myself....
See anything here that might assist?
http://www.sterndrives.com/trimpumpkits.html
http://www.psepmarineparts.biz/store...components.htmGetting bad advice is unfortunate, taking bad advice is a Serious matter!!
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,870
- Blog Entries
- 45
Getting bad advice is unfortunate, taking bad advice is a Serious matter!!
-
- Join Date
- Oct 2008
- Location
- Lake Travis Texas
- Posts
- 6,844
06-20-2009 03:38 PMFilter # is 35-89496. Yes two.
-
06-21-2009 07:48 AM
Thanks Paul and Jim.
I appreciate it. Especially the part number, Jim.
I will google that part number and see if I can find a source.
Wow, were those sterndrives.com prices kind of high or what?
Just curious, Jim.... have you seen many of these filters break down and become suspended in the oil?
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,870
- Blog Entries
- 45
06-21-2009 09:31 AMGetting bad advice is unfortunate, taking bad advice is a Serious matter!!
-
- Join Date
- Oct 2008
- Location
- Lake Travis Texas
- Posts
- 6,844
06-21-2009 09:53 AMI have seen them smashed, torn and off before.
Did you ever figure out where the water came from?