Does anybody have a lead on a pair of 525 intakes and wiring harnesses?
Thread: 525 EFI Intakes and harnesses
Results 1 to 9 of 9
-
- Join Date
- Oct 2008
- Location
- Georgetown, TX
- Posts
- 426
02-20-2009 10:25 AMBoat-less...
-
02-20-2009 07:52 PM
if you wanna go more horsepower , i have a lead in 575sci intakes superchargers complete fuel injection system with harness's and ecu's
probably the same price you'd pay for the 525 setups
-
- Join Date
- Oct 2008
- Location
- Georgetown, TX
- Posts
- 426
02-21-2009 03:29 PMI'll see if that's an option. THis is for a friend.
Boat-less...
-
- Join Date
- Oct 2008
- Posts
- 907
02-21-2009 11:09 PMThose would be different motors I think?
-
02-22-2009 12:45 PM
linster on the other website bought em to changeover his 525's to 575's , theres probably a small difference in the cam , but there both aggressive cams so with the hardware all it would take is a remap from someone who know's what there doing and i bet it would run perfect
i'm not a guru by any means , just read alot.
-
02-23-2009 02:30 AM
The cams are way different. 525efi is a much higher lift(.610/.632) roller cam. The 575sci cam is a flat tappet about .560 lift. The heads are also different.
-
-
- Join Date
- Nov 2008
- Location
- KPMP
- Posts
- 509
02-23-2009 11:56 AMNot mine, not sure if they're still available.
http://baltimore.craigslist.org/boa/1030378755.html
-
- Join Date
- Oct 2008
- Location
- Georgetown, TX
- Posts
- 426
02-23-2009 02:57 PMawesome leads, thanks guys.
Boat-less...