I dont know where to start, but heres the story, brand new starters, some high torque racing style, new solenoid relay,ran the boat for the first time in a year last sunday and one of the breathers rubber grommets had relaxed and the breather came out while running, soaked the whole motor down with oil especially the starter side, fixed that and had many start since, yesterday while doing a long hard run 30-40 miles through 2-4fters stopped for lunch,was there about 1 1/2 hours, went to hit the starter button and the amp guage jumps a little and i hear a click. checked all wires for tightness ,all good. Normally I'd just pull the starter but this is the one on my starboard motor and you have to pull the motor to get to it.