Before I started this project I looked to see if anyone online had
any information or help. But no luck, lots of people asking but
very little info.

I would like to thank Ryan B, Sparky from Vicious,
Glassdave and even DareDevil for there help along
the way.

This is what I started with, a open F16 canopy. After a couple
close calls I thought it would be best to get a lid over my
head for extra safety.





I Than heated and shaped a very thin plastic sheet over the
opening and attached 4 screws in each corner to hold it in place.
After a few sheets of cloth it started to take shape.






After the glass hardened I removed them from the boat and
just kept wrapping the part with layers and layers of cloth
until it started looking like a part.




--