I know Todd has some good ones
I had a great time! Running to South Buffalo was awesome, perfect chop.
Heres Fontain Mike
http://www.youtube.com/watch?v=zIh5KUTY61Y
A little bit of everyone:
http://www.youtube.com/watch?v=aGkPBbymxuo
Andy see what happens when you pass out
Marina shores
Some weiner
thats my boy!
After using up some fuel leaving the family at the dock and having some nice chop I was pretty excited to check my GPS
Thread: Fall run pics.
Results 1 to 20 of 86
Hybrid View
-
09-18-2011 08:38 PM
-
09-18-2011 11:04 PM
Nice pics. Awesome day on the water. Marina shores was great. Thanks to mike reeves for driving to wette vettes house to pick up a msd box for me, since mine decided to take a crap. Obviously thanks to Craig for supplying the box too. Todd came thru this morning with his truck to help pull my 2wd dually up the rain soaked ramp. The Indiana guys really rock! Im content to put mine away now, ran its fastest speed ever, 83.6 mph, prob coulda Squeeked another mph or two with some trim, but still made me smile!
I think I can speak for Ryan also, I think you'll be seeing us on A dock at marina shores again next summer!
-
- Join Date
- Nov 2008
- Posts
- 109
-
09-19-2011 08:57 AM
No problem Joe....thanks Ryan for stopping to check on us and thanks for everyone calling to check on us....what I learned from Saturday is that I should of left my F***ing stock valve covers on as they had the baffles in them. I don't think I ever was able to get the oil hot enough over the Summer to boil off the moisture in it as I always had my daughter with us. Oh well gotta figure out how to mount some puke tanks neatly over the winter.
-
-
09-19-2011 09:45 AM
Yeah the Gils would have to come off to get at two of the nuts for the valve covers. CP Performance has a rubber grommet that has foam in it....but I am not sure if that would work or not. Also I did a search on OSO and it looks like people have had luck with the 4" tall breathers....they have a step design to them. Any other ideas? Strip Poker on OSO is running these?
http://www.offshoreonly.com/forums/g...endations.html
http://www.petersonfluidsys.com/tank_acc.html
The only problem would be trying to route braided line or black hose neatly to make it work. We couuld use the existing breathers and run the hose to the can. I do not have room in the rear of the engine to mount these though...I would have to mount them on the extreme port or starboard side.
-
09-19-2011 10:36 AM
Problem with the stock style push in breathers in my experiance, is they still leak around the grommet itself. Those valve covers you have are sweet. I'd try the tall breathers. If you ran a puke tank, I would weld fittings in the covers, and AN lines to the tank. No leaks.
-
09-19-2011 09:43 AM
Hey Mike, can you add the tall breathers like these? They have steps inside to kinda act like baffles. I do believe you have the polished angle cut valve covers if I remember correctly.
http://teaguecustommarine.com/index....-breather.html
-
09-19-2011 10:22 AM
I was going to give them a call....after looking on OSO it looks like alot of people have luck with these. My only question is how to they attach to the valve cover? I see that you are supposed to run a bead of silicone around them but not sure how they attach. And yes I do have the polished Teague valve covers.
-
- Join Date
- Nov 2008
- Posts
- 115
09-19-2011 10:51 AMIt all comes down to whether you want to take the Gills / valve covers off. If you take them off the options are plentiful. If not then there are less options and some type of tank will be the easiest. I go back to when we were getting the covers ready and debating whether to put a baffle under the breather hole. Dam I wish I would have made you put a baffle under there! Oh well now you've got a winter project!
Craig
-
-
09-19-2011 11:20 PM
-
09-18-2011 11:16 PM
I like that video of us running when I come from behind and Chase down the red Fontane towards the end!
-
- Join Date
- Oct 2008
- Location
- West Michigan
- Posts
- 37,856
- Blog Entries
- 45
09-19-2011 12:06 AMNice stuff.......
Getting bad advice is unfortunate, taking bad advice is a Serious matter!!
-
- Join Date
- Nov 2008
- Posts
- 109
09-19-2011 07:26 AMCool pics and videos! The one shot if you'd panned a little more to the right mu boat would've been in the shot, sadly still on the lift. About the time you shot the videos I was watching a 1year old nephew tear into his first birthday cake. I guess that's important too, but he would never know if it's a few weeks late.
Good thing Andy doesn't sleep with his moth open.
-
09-19-2011 07:55 AM
I will concur that this weekend was fun!!! Actually I am looking to repeat this weekend at the end of the month if anyone is game... besides the cold at night... it was a great time! And yes, Andy is lucky he sleeps with his mouth shut and that we did not have a permanent marker... oh, this brings back college days...
Last edited by teamsynergy; 09-19-2011 at 09:32 AM.
-
09-19-2011 08:51 AM
Here are some various pics... I have more, but those will stay off the web lol
-
09-19-2011 09:47 AM
evidently Todd likes playing with wieners
-
-
09-19-2011 10:38 AM
Coming off plane here...