Can anyone tell me or look up the cam specs on an HP500 carb motor please. Just need lift and duration if possible. Is it the same as the EFI HP500?
Thread: Cam specs HP500 carb motor?
Results 1 to 5 of 5
-
- Join Date
- Oct 2008
- Posts
- 2,001
03-19-2010 03:37 PM
-
03-19-2010 04:18 PM
the carb and efi are not the same.
HP500 Carb: http://www.cranecams.com/index.php?s...11&lvl=2&prt=5
and for future reference, EFI: http://www.cranecams.com/index.php?s...21&lvl=2&prt=5
-
- Join Date
- Oct 2008
- Posts
- 2,001
03-19-2010 04:28 PMThat's odd, the Merc Manual lists the EFI cam as .342 lobe lift both intake and exhaust.
-
03-20-2010 06:42 AM
From my Mercury Hi-Performance manual...
Duration at .050 In.
(1.27 mm) Cam Lift
Lobe Lift + .002 (0.051)
HP 500
.339” (8.61)
.352” (8.94)
284°
292°
502 CID (8.2 Litre)
Master Wrench
26' Joker, OPA 626
-
03-20-2010 08:23 PM
Ted,
Here is our card on the HP 500.
Bob