Engine pics..

[RPM]

show'em if ya got'em!

I'll start..
These are in the 41 Legend
http://i454.photobucket.com/albums/qq264/RPM1075/SERIOUS%20stuff/P8030022.jpg

[RPM]

http://i454.photobucket.com/albums/qq264/RPM1075/SERIOUS%20stuff/P8030015.jpg

[RPM]

http://i454.photobucket.com/albums/qq264/RPM1075/SERIOUS%20stuff/P8030014.jpg

[drpete3]

U have dual carbs on both enginse right? Just have one flame arrestor removed

[RPM]

U have dual carbs on both enginse right? Just have one flame arrestor removed

yep!

[RPM]

The new blowers Travis put on made it a little tight under the hatches.

[RPM]

I thought this was a cool shot!
http://i454.photobucket.com/albums/qq264/RPM1075/SERIOUS%20stuff/bdswl.jpg

[Scarab KV]

NA 600s
Gen V blocks
Huber Trans
Dry exhaust

37548

[SHARKEY-IMAGES]

http://sharkeyimages.zenfolio.com/img/v3/p280443172-4.jpg

[SHARKEY-IMAGES]

http://sharkeyimages.zenfolio.com/img/v4/p1068920572-4.jpg

[SHARKEY-IMAGES]

http://sharkeyimages.zenfolio.com/img/v4/p1024657499-4.jpg

[FULL FORCE]

41 Apache... The Chief.....I love Robs engines......bet Barbeeee does too!

http://i36.photobucket.com/albums/e41/86lxmustang/100_9605.jpg

[FULL FORCE]

Lake Effect 353 Formula... blowers look cool!

http://i36.photobucket.com/albums/e41/86lxmustang/116_3129.jpg

[FULL FORCE]

Full Force 320 Baja... simple and sweet... red came out cool!

http://i36.photobucket.com/albums/e41/86lxmustang/113_8223.jpg

[FULL FORCE]

41 Saber WickedWon...

http://i36.photobucket.com/albums/e41/86lxmustang/100_3371.jpg

[2112]

36"Gladiator, Rigging Strongly influenced by Wicked One;
.

[Dan Adams]

41 Saber WickedWon...

http://i36.photobucket.com/albums/e41/86lxmustang/100_3371.jpg

Thanks Dude! Maybe see you guys around the 15th

[Coolerman]

Thanks Dude! Maybe see you guys around the 15th

Hey Dan, how's it runnin after the rebuilds?

[FULL FORCE]

Thanks Dude! Maybe see you guys around the 15th

Cool... hope to see you then!

[Spicy]

Big Heat in my 400SS....... :sifone: :26: :03:

[jayboat]

36"Gladiator, Rigging Strongly influenced by Wicked One;
.

Sharp! :sifone:

Here's one of the heaters in Stephen Young's 40 OL.
(heavily manipulated in photoshop...)

http://img36.imageshack.us/img36/9113/dsc54801200.jpg

[Airpacker]

The Green Monster
509 SC/EFI 900hp
Home brewed power for my little 25 Daytona:driving:

[Airpacker]

36"Gladiator, Rigging Strongly influenced by Wicked One;
.

Not bad looking for some FERD mills :)




















Actually, very nice looking set up.

[HOTROD2]

CARY 50:driving:

[LEOPAJM]

Here's a better shot off WW engines ...

[LEOPAJM]

This is the only shot I have of these ....

[ChiefApache]

41 Apache... The Chief.....I love Robs engines......bet Barbeeee does too!

http://i36.photobucket.com/albums/e41/86lxmustang/100_9605.jpg

Timmy, awesome pic!! Thanks so much!!!!!!!!!

[tomcei]

i can't wait to let this thing eat!

[Airpacker]

CARY 50:driving:
Geeezus man, with all the polishing that sucker needs to stay that shiny, when do you have any time for actual boating ? :)

[TxHawk]

After a polish.

[DAREDEVIL]

510 ci, ~ 800 HP / NA

not pretty but running strong.

[Shah Mat]

http://i148.photobucket.com/albums/s21/bftstam/100_1047.jpg

[SHARKEY-IMAGES]

http://sharkeyimages.zenfolio.com/img/v6/p315757211-4.jpg

[nitrotommy]

here's mine

[SLOWOUTBOARD]

does this count?

[NORTECHJ]

Some little 700's

[jayboat]

does this count?

no.






:sifone:

[Quinlan]

CARY 50:driving:


Man that rocks! Just watched the "Great Mcarthey" Miami Vice race Again, The wife got me the WHOLE set 90 hrs or so but I just keep watchin this one.
Maybe you could really give them a run with those.:sifone:

Quinlan

[HOTROD2]

man that rocks! Just watched the "great mcarthey" miami vice race again, the wife got me the whole set 90 hrs or so but i just keep watchin this one.
Maybe you could really give them a run with those.:sifone:

Quinlan

sorry its still a 32000 lbs pig, they are only 500 hp each i might be able to beat the one on miami vice but i dont have enough fuel on board to race as far as they did....thats my favorite episode also.

[RPM]

http://sharkeyimages.zenfolio.com/img/v6/p315757211-4.jpg

WOW! What are those in?

[FULL FORCE]

This is the only shot I have of these ....

Sweet! now I have a pic of it too...now just need one with the exhaust.. Thanks LJ...:sifone:

[FULL FORCE]

Timmy, awesome pic!! Thanks so much!!!!!!!!!

Anytime Barbeeee.. I love that picture....better then mine!

[WARPARTY36]

WOW! What are those in?

Looks like an OL. You don't wan't to crawl in there barefoot in the sun:ack2:

It would be nice to hide oil leaks though:)

[Dude! Sweet!]

i can't wait to let this thing eat!

Might be a bit biased, but this is one of my favorites! :sifone:

[Dude! Sweet!]

Couple more I dig...

[Dude! Sweet!]

Probably one of my all time favorite engine compartments...
:reddevil:

[2112]

I love those older swept forward Stellings. They don't make them anymore. :(

I have some Kinsler FI engines I am working on, Hopefully they'll be done this winter. :driving:
.

[lavey jr]

Laveycraft 39' EVO
Merc. 700's

[lavey jr]

Lavey 32' NuEra
Teauge 800's

[lavey jr]

Lavey 29' NuEra
Merc. 600's

[offshore runner]

Those Laveys sure look clean
I love that 39' evo!!

[Hot for Teacher]

Hot for Teacher

[JoeD]

Eickerts

[Wrinkleface]

Lavey 32' NuEra
Teauge 800's

cool, that should run like a raped ape!!!:sifone:

[Dude! Sweet!]

Hot for Teacher

I know a dude who has a boat like that! :D

How you been Tom?

[RPM]

I know a dude who has a boat like that! :D

How you been Tom?

Dude, that avitar is hilarious!

[OldSchool]

http://i148.photobucket.com/albums/s21/bftstam/100_1047.jpg

That looks great Joey!!!:)

[jayboat]

Here's the bidness division of Nor-Tech's new 427...

http://img200.imageshack.us/img200/971/nt4271321.jpg

[Hot for Teacher]

I know a dude who has a boat like that! :D

How you been Tom?

We're doing good Sean..... running to the island on Sunday....

How's the new race boat coming? Are you taking it down to SD next month... Hope to see you on the water soon.

[DAREDEVIL]

couple more !!:)

[DAREDEVIL]

and more:seeya:

[Sea-Dated]

My boring little 500's

[ChiefApache]

Hot for Teacher

Very nice!

[ChiefApache]

My boring little 500's

Turn key baby.......turn key!:sifone:

[FULL FORCE]

Turn key baby.......turn key!:sifone:

Right on!

[KnotRight]

T53,s

PPS BUILT... RIGGING COMPLETED BY MILLENNIUM MOTORS

http://inlinethumb31.webshots.com/44190/2995509140103938508S600x600Q85.jpg

[Uncle Dave]

Lavey 2750

Ilmor 710

UD

[Uncle Dave]

estimated 2000 HP & 2000lb/ft 2 boilers "Thelma and Louise"

The Natchez steamer in New Orleans underway at 110LB boiler pressure.

Spent a half an hour with get this- "Scotty" in the engine room checking her out.

Max boiler pressure when racing the double side wheeler for fastest paddle wheel boat on the mississippi - and manually overriding the safeties 215lb and 21 rpm- 19 MPH.

360KW diesel electric

Totally phat...

UD

[2112]

T53,s

PPS BUILT... RIGGING COMPLETED BY MILLENNIUM MOTORS



What's it in? I hear they don't break often but are very thirsty. :sifone:
.

[Dude! Sweet!]

What's it in? I hear they don't break often but are very thirsty. :sifone:
.

46 Skater... Do yourself a favor and check out KnotRights build threads in Skater section of the various sites. I've lurked on it for a couple of years and to say that what he's done is amazing would be a gross understatement. Awesome work KnotRight!

[MattBMiller]

41 Apache... The Chief.....I love Robs engines......bet Barbeeee does too!

http://i36.photobucket.com/albums/e41/86lxmustang/100_9605.jpg

Nice!

[SHARKEY-IMAGES]

ILMOR :sifone:




.

http://sharkeyimages.zenfolio.com/img/v2/p679499804-4.jpg

[RMPRam]

572's w/PSI's in a 38 Cigarette flatdeck.

[KnotRight]

46 Skater... Do yourself a favor and check out KnotRights build threads in Skater section of the various sites. I've lurked on it for a couple of years and to say that what he's done is amazing would be a gross understatement. Awesome work KnotRight!

Thanks bro!

Its all in the Corona:sifone:

[boostbros]

knotright did a nice job..... but it was the old Myway turbine boat that ran away from everyone at the poker runs bill tomlison really did a huge amount of prototype stuff to get it right he kinda makes it look easy to install turbines well it is if its been done to the boat already!

[MacGyver]

JBS Racings Donzi "Beaver Fever"

http://i29.photobucket.com/albums/c283/sparkyrick/IMG_0102.jpg

[SHARKEY-IMAGES]

wow! What are those in?
outerlimits

[SHARKEY-IMAGES]

http://sharkeyimages.zenfolio.com/img/v3/p639202915-4.jpg

[Tank]

Like candy....:drool5:

[SHARKEY-IMAGES]

http://sharkeyimages.zenfolio.com/img/v1/p365439446-4.jpg

http://sharkeyimages.zenfolio.com/img/v2/p430253189-4.jpg

http://sharkeyimages.zenfolio.com/img/v6/p15138430-4.jpg

[SHARKEY-IMAGES]

http://sharkeyimages.zenfolio.com/img/v4/p324235307-5.jpg

http://sharkeyimages.zenfolio.com/img/v3/p315579648-4.jpg

http://sharkeyimages.zenfolio.com/img/v1/p112438159-4.jpg

[2112]

http://sharkeyimages.zenfolio.com/img/v6/p15138430-4.jpg

How do they get away with mounting those fuel pumps way above the tanks?

.

[SHARKEY-IMAGES]

How do they get away with mounting those fuel pumps way above the tanks?

.
It appears the filters are on top and the pumps are on the bottom...

[2112]

It appears the filters are on top and the pumps are on the bottom...

Yes but both are way above the tanks. I have a set of those pumps and the manufacturer implicitly states they must be mounted below the bottom of the pick up tube. Obviously they are making it work so I am hoping to find out what their secret is. :sifone:
.

[SHARKEY-IMAGES]

If they are Kinsler's, I had mine way above my tanks as well for my 2.5 EFI MERC Offshore Racing Outboards. never had an issue.

http://sharkeyimages.zenfolio.com/img/v7/p1048201723-4.jpg

[SHARKEY-IMAGES]

http://sharkeyimages.zenfolio.com/img/v5/p199780051-2.jpg

[SHARKEY-IMAGES]

http://sharkeyimages.zenfolio.com/img/v3/p132417830-2.jpg

[SHARKEY-IMAGES]

http://sharkeyimages.zenfolio.com/img/v1/p521486765-2.jpg

[KnotRight]

knotright did a nice job..... but it was the old Myway turbine boat that ran away from everyone at the poker runs bill tomlison really did a huge amount of prototype stuff to get it right he kinda makes it look easy to install turbines well it is if its been done to the boat already!


This is the first 1996. The First Turbine conversion was done in 2000
Bill Built it with Cobra1200,s then went to Turbines.
I built it with 1100,s then went back to Turbines.

Ross Fedorki really deserves the credit.
He also has all of the custom parts such as exhaust and bell housings
and intakes saved in Cad. He could duplicate these custom parts.

The reason why I make it look easy is because it is.;)
I assure you it is easier to rig Turbines then the gas counterparts:seeya:

[OldSchool]

MDG Performance 800's

[pkspx]

Gellner Mill

[MacGyver]

http://sharkeyimages.zenfolio.com/img/v5/p199780051-2.jpg

WOW! Nice V-12 :)

[Dueclaws]

Jag SB engine.

[HTMike]

http://i660.photobucket.com/albums/uu328/DogwoodDr/2001%20HTM/dsc00059si0.jpg

[Velocity Vector]

509's/632hp/573tq
http://i265.photobucket.com/albums/ii230/velocity320/BdKS-CB2kKGrHqEOKikEq3qPh1uBK3qUB86.jpg
http://i265.photobucket.com/albums/ii230/velocity320/DSC_0011-4.jpg

[RPM]

509's/632hp/573tq
http://i265.photobucket.com/albums/ii230/velocity320/BdKS-CB2kKGrHqEOKikEq3qPh1uBK3qUB86.jpg
http://i265.photobucket.com/albums/ii230/velocity320/DSC_0011-4.jpg

Sweet!

[Raylar]

Just so we get a little shot here too!


Best Regards,
Ray @ Raylar

[Raylar]

Here is still my favorite! 496's can look good too!

Best Regards,
Ray @ Raylar

[DAREDEVIL]

Here is still my favorite! 496's can look good too!

Best Regards,
Ray @ Raylar

And what would the pricetag be on this ???:rolleyes:

[skaterdave]

565 cu in BBC 840 hp on 93 pump, one stock holley 1050

[Geronimo36]

Just finished rebuilding one of my blower engines that had 250 hrs on it... 838 hp / 834tq.
52680 52681
Dyno is from a few years ago but still the same power...:cheers2:
nqlWw0_4Fh0

[DAREDEVIL]

565 cu in BBC 840 hp on 93 pump, one stock holley 1050

DRY SUMP,,,bored out supercat with flat top piston !

Correct ?

[skaterdave]

355 cu SBC for skiff. 575 hp

[skaterdave]

DRY SUMP,,,bored out supercat with flat top piston !

Correct ?

comparable, but these were built new this way

[35 Lightning]

540 Merlin Blocks, Dart Pro 1 Heads, Dart Intake,
Low Tech Performance,, Dependable,
USA:

[Raylar]

Daredevil:
If you're talkin about the 600 cubic inch closed cooled HO750 its about $54K complete with exhaust and all the trimmin's. Current horsepower is 765HP at 5300 rpms and 840ft/lbs of torque at 4300 rpms on 89 pump gas. But I think it looks way cooler than it runs!

[Uncle Dave]

Daredevil:
If you're talkin about the 600 cubic inch closed cooled HO750 its about $54K complete with exhaust and all the trimmin's. Current horsepower is 765HP at 5300 rpms and 840ft/lbs of torque at 4300 rpms on 89 pump gas. But I think it looks way cooler than it runs!

Thats an awesome engine.
The intake/injection system alone is cause for wood.

UD

[Traviss]

428 sbc

[jayboat]

Here's one of the puppies in Bob Morgan's Skater, Bad Moon Risin'

http://farm3.static.flickr.com/2520/4238374955_7bb990e93f_o.jpg

[dykstra]

Here's one of the puppies in Bob Morgan's Skater, Bad Moon Risin'

http://farm3.static.flickr.com/2520/4238374955_7bb990e93f_o.jpg

way cool:sifone:

[Velocity Vector]

36 Gladiator Totally Unleashed, Maken noise

http://i265.photobucket.com/albums/ii230/velocity320/22912_1-1.jpg
http://i265.photobucket.com/albums/ii230/velocity320/22912_2-1.jpg

[2112]

36 Gladiator Totally Unleashed, Maken noise



Why the strut on the innner transom plates to the stringer?

Are the drives non-Mercury? If not why the different transom plates?

.

[CRC]

No 525s yet?? What's up with that? Here's mine:

[Pit]

I like these...

[Slandrew]

I like these...And the winner is!!:iagree:The motor mount in the middle is the best part:kiss:

[Geronimo36]

Why the strut on the innner transom plates to the stringer?

Are the drives non-Mercury? If not why the different transom plates?

.

Good eye!

I'm gonna guess cause they have extension boxes or the engines are mounted forward so they didn't bother using a merc. inner transom plate??

[Geronimo36]

I like these...

If you have 5'5" engines, do the 5'5" bondes come with it?:driving:

[Team Tsunami]

Why the strut on the innner transom plates to the stringer?

Are the drives non-Mercury? If not why the different transom plates?

.

They put #5's on it.

[AIR TIME]

knotright did a nice job..... but it was the old Myway turbine boat that ran away from everyone at the poker runs bill tomlison really did a huge amount of prototype stuff to get it right he kinda makes it look easy to install turbines well it is if its been done to the boat already!

so your saying because the boat had turbines once THAT ITS EASY TO REINSTALL THEM:smash::smash:, What knot right did was take a blank bilge that came with a bunch of parts on the side, them decides to put v8 blower motors in so he started from zero no instructions and designed the bilge to hold two big azz blower motors , custom drive shafts, motor mounts headers with tails ran it for a yr or so. then decided to go to TURBINES and has to look at a thousand parts with NO INSTRUCTIONS and pieces missing and outside over the winter figures out where to put motors starting backwards since it came with parts so the install is reverse from a regular install of motors. I would like to see you do this:smash:, GERRY AWESOME JOB just the wiring in that boat has to be miles long you have a lot of talent dude also in painting he had his hands in that too. you need to open a turbine shop/custom paint:sifone::sifone: ps theres a custom windshield going on this spring.

[thedonz]

:_boobies:
I like these...

[AIR TIME]

This is the first 1996. The First Turbine conversion was done in 2000
Bill Built it with Cobra1200,s then went to Turbines.
I built it with 1100,s then went back to Turbines.

Ross Fedorki really deserves the credit.
He also has all of the custom parts such as exhaust and bell housings
and intakes saved in Cad. He could duplicate these custom parts.

The reason why I make it look easy is because it is.;)
I assure you it is easier to rig Turbines then the gas counterparts:seeya:

don't be so modest, I have seen you fix stuff on boats so the ride would go on and if you were not there those few times the boats would have been towed back for the day instead of running. which in one case would of been better dead, it still hurts thinking of that ride back from block in that 32:eek::ack2:. gerry you make it look and sound easy.

[2112]

They put #5's on it.

Really? Do you know why and how it worked out?

.

[Pit]

If you have 5'5" engines, do the 5'5" bondes come with it?:driving:

Not sure, I wonder which one would last the longest before requiring a freshen up..:ack2:

[detail toyz]

I like these...

Ya me too:cheers2:

[Raylar]

Yes I like the part with a nice set of twins in the middle maybe even better than the twins on both sides of that (bonde) Blonde, geeze Geronimo even a blonde like me can spell blonde!

Best Regards,
Ray @ Raylar

[Velocity Vector]

Why the strut on the innner transom plates to the stringer?

Are the drives non-Mercury? If not why the different transom plates?

.

This gladiator had #5 SSM not sure of the strut

[Geronimo36]

Yes I like the part with a nice set of twins in the middle maybe even better than the twins on both sides of that (bonde) Blonde, geeze Geronimo even a blonde like me can spell blonde!

Best Regards,
Ray @ Raylar

shoot me for the typo and the missing apostrophe! :bump:

[Geronimo36]

Not sure, I wonder which one would last the longest before requiring a freshen up..:ack2:

Very good question.... hmm.....:toetap05:

[Raylar]

Your excused by me a person who has the worlds worst spelling. Just having a little fun at your expense, didn't mean to offend! Can't shoot you anyway, we need you in the sport!

Best Regards,
Ray @ Raylar

[Geronimo36]

Your excused by me a person who has the worlds worst spelling. Just having a little fun at your expense, didn't mean to offend! Can't shoot you anyway, we need you in the sport!

Best Regards,
Ray @ Raylar

Nah, no offense taken, I should have put a smiley. I don't take offense to anything I hear or see on the good ole information highway!! :driving:

[2112]

This gladiator had #5 SSM not sure of the strut

Anyone know how that is working out performance wise? Why did they go that route on a such a light boat? Gladiators are capable of triple digits on power a modified bravo can handle.

I am guessing the strut is because of the extra weight of the #5?


Just askin :confused:

.

[2TR]

These really dont have a "Bling" factor... :toetap05:

[Biggus]

Here's my Ciggie mills

http://i817.photobucket.com/albums/zz91/klflashroadrunner/Howie_Gary_Junkyard231.jpg

[Pit]

Here is a set of Gellners we installed last season. Looking forward to dialing this thing in this year...:driving:

[in the pink]

I finally have something worth talking about. :hurray: 600cui.

[bajabob 718]

here my baby 540dart

[Geronimo36]

Here is a set of Gellners we installed last season. Looking forward to dialing this thing in this year...:driving:

Nice! Is Nick going to be back this year?

[Pit]

Nice! Is Nick going to be back this year?

Sounds like he plans to.. We are happy to get him there.. Another nice OL, Gellners and Rigging to repersent.

[glh]

I only have one....



http://img.photobucket.com/albums/v235/25outlaw/Bateau/Key%20West%202009/16%20November/P1080297.jpg

[old377guy]

gee, I can "barely" make out the name of the company, city, state and phone number... hopefully they're standing behind you to the degree appropiate.

[LIVE WIRE]

I only have one....



That says OUCH on so many levels.My condolences. Its funny how the builder knew right where to put that sticker, funny how things work out. Karma is a b*&%h

[GENERAL LEE]

Here are my ol hamster wheels in the 368:

Original look & hardware:

http://img651.imageshack.us/img651/6408/4134129763030bg.jpg (http://img651.imageshack.us/i/4134129763030bg.jpg/)


Sans headers in the pic, being put on the dyno after a top end job, & paint update last Winter:

http://img213.imageshack.us/img213/9709/dyno2.jpg (http://img213.imageshack.us/i/dyno2.jpg/)

[GENERAL LEE]

Here are the Zul's in my former Top Gun.

I always liked these:

http://img651.imageshack.us/img651/7042/grandlake028.jpg (http://img651.imageshack.us/i/grandlake028.jpg/)

http://img4.imageshack.us/img4/512/grandlake030.jpg (http://img4.imageshack.us/i/grandlake030.jpg/)

[Geronimo36]

Here are my ol hamster wheels in the 368:

Original look & hardware:



Sans headers in the pic, being put on the dyno after a top end job, & paint update last Winter:


Here are the Zul's in my former Top Gun.

I always liked these:


Kick azz dude! BTW, with the small pulley on the top do you have any issues with blower belt dust? Few years ago I changed pulleys around so now my top pulley is smaller and it's putting off a lot of blower belt dust and pisses me off cause the engine room gets dirty quick. :(

[dykstra]

:sifone: Monster HP right here. HAHAHA

[GENERAL LEE]

Kick azz dude! BTW, with the small pulley on the top do you have any issues with blower belt dust? Few years ago I changed pulleys around so now my top pulley is smaller and it's putting off a lot of blower belt dust and pisses me off cause the engine room gets dirty quick. :(

Thanks man!

Yes, I get a little bit of belt dust as well. It's a very slight amount, unless moisture somehow gets on it through the scoop, then it can make a mess. I always try to stay on top of wiping down the area after running it, since there's so much room in there. It really helps keep the belt dust, & oil vent drip from the dry sump canisters, from building up & looking all ghetto in there http://smiliesftw.com/x/cool.gif (http://smiliesftw.com)

[Geronimo36]

Thanks, I try and do the same. Usually I can open up the hatch after a long run and everything looks spic and span but the moment you set foot in the bilge it's like anywhere you step you get black foot prints... Bothers the heck outta me... Let's just say there's lots of spray 9 on the boat!!!

I've tried replacing the belt a few times and that didn't help so this summer I'm going to reverse the idler pulley so the idler is on the outside of the belt pushing in, instead of the inside pushing out to see if that helps.

[GENERAL LEE]

Thanks, I try and do the same. Usually I can open up the hatch after a long run and everything looks spic and span but the moment you set foot in the bilge it's like anywhere you step you get black foot prints... Bothers the heck outta me... Let's just say there's lots of spray 9 on the boat!!!

I've tried replacing the belt a few times and that didn't help so this summer I'm going to reverse the idler pulley so the idler is on the outside of the belt pushing in, instead of the inside pushing out to see if that helps.


I know what you mean about your feet tracking dirt everywhere. I usually have a pair of ankle socks in the boat with my shoes, so I'll just wear them in there, and on the docks, which can be filthy as hell. If I don't have any socks, I'll slide around on a couple of Swipes or rags, which clean the floor and my feet. It works in a pinch.

Good luck with the switch on your idler pulley. Maybe it will at least throw the belt dust downward into the bilge, so you can flush it out easier with a hose & the bilge pump, rather than having to wipe EVERYTHING down after a hot day :ack2:.

[glh]

Two of the three spares in the shop...

[SHARKEY-IMAGES]

Stotler

http://sharkeyimages.zenfolio.com/img/v1/p365439446-4.jpg

Tyler Crockett

http://sharkeyimages.zenfolio.com/img/v3/p315579648-4.jpg

ILMOR

http://sharkeyimages.zenfolio.com/img/v5/p792992430-4.jpg

Sterling

http://sharkeyimages.zenfolio.com/img/v3/p280443172-5.jpg

Potter

http://sharkeyimages.zenfolio.com/img/v7/p536435559-5.jpg

[WETTE VETTE]

My 600" 10.8:1 NA sportin TR and a vacuum pump. Built and rigged by yours truely!:driving:

[2112]

Built and rigged by yours truely!:driving:

Nicely done. Were you able to do a before and after test with the vacuum pump or did it go on with a bunch of other changes?

I have always been interested in those thinking they may drop oil temps by reducing foam wrap up on the cranks, rods and pistons.

.

[GENERAL LEE]

Two of the three spares in the shop...


Blond, brunette, & red............I like it http://smiliesftw.com/x/cool.gif (http://smiliesftw.com)

[glh]

Blond, brunette, & red............I like it http://smiliesftw.com/x/cool.gif (http://smiliesftw.com)What's not to like... :cheers2:


http://www.seriousoffshore.com/forums/attachment.php?attachmentid=51705&d=1263391251

[Geronimo36]

My 600" 10.8:1 NA sportin TR and a vacuum pump. Built and rigged by yours truely!:driving:

Great work! I have great respect for us "do-it-yourself" guys! :driving:

[Raylar]

glh:
Thats the best lookin set of triples I've seen in a long time, nothin a little youth and money won't do! With those on a boat I am not even sure you need any engines! Just float around and enjoy!

Best Regards,
Ray @ Raylar

[detail toyz]

Here are my ol hamster wheels in the 368:

Original look & hardware:

http://img651.imageshack.us/img651/6408/4134129763030bg.jpg (http://img651.imageshack.us/i/4134129763030bg.jpg/)


Sans headers in the pic, being put on the dyno after a top end job, & paint update last Winter:

http://img213.imageshack.us/img213/9709/dyno2.jpg (http://img213.imageshack.us/i/dyno2.jpg/)

Ive always liked your boat awsome combo, and is still one of my faviortes!!

[Mad Props]

My Shockwave with 700'S

[GENERAL LEE]

Ive always liked your boat awsome combo, and is still one of my faviortes!!

Thanks man, I really appreciate the compliments! :cheers2:

I used to look at pictures of it on Bullocks' website before I got it. Funny how things work out, because I never imagined I'd end up with it. http://smiliesftw.com/x/cool.gif (http://smiliesftw.com)

[glh]

glh:
Thats the best lookin set of triples I've seen in a long time, nothin a little youth and money won't do! With those on a boat I am not even sure you need any engines! Just float around and enjoy!Good point Ray but a boat is a LOT LESS expensive to run than one of those three I am sure!:ack2:

[C_Spray]

LED's bling everything up. 600 Innovations / Stellings.

Yes. New coolant expansion tanks are in the works.

[SHARKEY-IMAGES]

Very nice Chuck !!!

[detail toyz]

Thanks man, I really appreciate the compliments! :cheers2:

I used to look at pictures of it on Bullocks' website before I got it. Funny how things work out, because I never imagined I'd end up with it. http://smiliesftw.com/x/cool.gif (http://smiliesftw.com)

Thats pritty cool!!:sifone:

You bringing that thing to Desert Storm this year???

Its Chad by the way Dan Kruse's buddy, Maybe you remember me talking to you before.

[Dude! Sweet!]

My 600" 10.8:1 NA sportin TR and a vacuum pump. Built and rigged by yours truely!:driving:

I've often wondered why you don't see more vacuum pumps in boats.

[Dude! Sweet!]

They run the exhaust out the side on the Cintron Fountain because they're running the motors so close together (so harder to go out back) or to be more consistent in exhaust pipe lengths?

Another thing I've always wondered about, the impact on performance from running different length tails from bank to bank, but maybe the tube diameter is big enough that it doesn't matter?

[ProMod]

Rudy Dryden 565s in our Talon!