PDA

View Full Version : Where can I find??


OldSchool
05-18-2009, 09:05 PM
Some rubber grommets for rigging? I installed my new intercom system today and I need some grommets for the holes that I drilled in my side panels. They are 1" in diameter and about 5/8ths thick. I'm thinking that something like the inserts that you can buy for valve covers...just thicker

Anyone???

Thanks in advance, Craig:)
Dude! Sweet!
05-18-2009, 09:09 PM
McMaster Carr. They have everything.
Buoy
05-18-2009, 09:48 PM
McMaster Carr. They have everything.

Yep, you can find almost ANYTHING there, and you'll have it the next day.

If'n only they also had a strictly marine dept.:sifone:
Chris
05-18-2009, 09:54 PM
Lowe's has a few. Most of the Ace Hardware stores have a pretty good nuts & bolts department- many rows of trays. McMaster is usually my go-to guy though- if you can wait a day.
Tommy Gun
05-18-2009, 10:20 PM
Undrill the holes and go wireless.
Sydwayz
05-19-2009, 09:18 AM
Look at some of the sites like CP Performance and such. They have billet rigging grommets that you could pick to match your interior.
Ratickle
05-19-2009, 09:23 AM
Look at some of the sites like CP Performance and such. They have billet rigging grommets that you could pic to match your interior.

What do you look under? I'm having no luck searching their on-line catalog.....
Sydwayz
05-19-2009, 10:00 AM
See if these will work for you:
http://eddiemarine.com/store/cart.php?m=product_list&c=90

Eddie calls them Stringer Washers, but I have seen them called billet grommets at other places.
old377guy
05-19-2009, 03:01 PM
Undrill the holes and go wireless.

brilliant idea..... no corrosion either... ya know, I could save some serious weight by eliminating my battery cables too:sifone:
OldSchool
05-19-2009, 03:26 PM
Undrill the holes and go wireless.

Gee, thanks!!!:moon::moon::smash:

Brian, thanks for the link. I didn't see that they have anything for a 1" hole. I really don't need bling, the holes that I drilled are on the sides of the bolsters and not very visable unless you are looking for them :)
Davidmnc
05-19-2009, 03:51 PM
Gee, thanks!!!:moon::moon::smash:

Brian, thanks for the link. I didn't see that they have anything for a 1" hole. I really don't need bling, the holes that I drilled are on the sides of the bolsters and not very visable unless you are looking for them :)

Blasphemy!:ack2:
phragle
05-19-2009, 04:24 PM
mcmaster carr.... another vote.