Liquid Glass 41 on ebay

[catmando]

This boat is rigged with 850s and is offered at $500,000 minimum reserve. The boat with 700s retails for $760,000 so this one could be a basement bargain;

http://cgi.ebay.com/ebaymotors/Boats_Power-Motorboats__2008-Liquid-Glass-41FT-LUXURY-CAT-ONE-OF-A-KIND_W0QQitemZ140289389180QQddnZBoatsQQadiZ2795QQddiZ2831QQadnZPowerQ20Q26Q 20MotorboatsQQcmdZViewItemQQptZPower_Motorboats?hash=item140289389180&_trksid=p450

[Wrinkleface]

Lookz like the 1 that was at the Miami show earlier this year??????????? Not sure??

[cosmic12]

This doesn't surprize me at all,knowing who builds them. There is alot of very bad histroy with Randy. Anyone remember Profile? It makes me smile when I see he has to try doing this. Why would anyone spend that kinda loot on a cat builtby someone with his track record when you can get the real thing from Skater / MTI /ect--ect with alot of positive histroy.

[TEAMBAJA]

This boat is rigged with 850s and is offered at $500,000 minimum reserve. The boat with 700s retails for $760,000 so this one could be a basement bargain;

http://cgi.ebay.com/ebaymotors/Boats_Power-Motorboats__2008-Liquid-Glass-41FT-LUXURY-CAT-ONE-OF-A-KIND_W0QQitemZ140289389180QQddnZBoatsQQadiZ2795QQddiZ2831QQadnZPowerQ20Q26Q 20MotorboatsQQcmdZViewItemQQptZPower_Motorboats?hash=item140289389180&_trksid=p450

Cat, $500,000 is just an opening bid. No idea what the actual reserve is.

[cigdaze]

Ya, there's a real bargain. :rolleyes:

[Offshore Ginger]

I am presently working on a Profile cat and can not believe how poorly the boat is construscted :ack2:

[Airpacker]

half a mil worth of very ugly green boat. "One of a kind" That will definately help the resale value won't it?

[Dreamer]

what whould it be worth if u parted it out?

[isellpower]

Weakest name for a boat company ever. Meh, I'll take 2 used Nor-Techs for the price of that thing.

[Offshore Ginger]

wonder if they sold any at all, I've only seen a red and then the green one, I take my 200k back, 150k is more fair price All the Profiles I've seen at LOTO have either delamed or is a rattle bucket, they are just so thin on the layup. man you are so RIGHT and talk about a bucket . I explained in a earlier post that i was working on a Profile and the lay up is so very $hity one layer of chop on the strakes , which makes it very hard to repair along with all the dry chop i encountered doing a very small repair , that went from small to very large ,to almost the full length of the last step and the same length on the inside of the tunnel . I got to say that if you could see the piece i pulled of with my hand , that was all dry chop with no resin at all , i think you would all go WOW .:ack2::ack2::ack2:

[Chris]

Alot of dough tied up in that thing. The cost of a CNC mold alone...

[cosmic12]

I am presently working on a Profile cat and can not believe how poorly the boat is construscted :ack2:

As I said before, How could anyone buy a boat with the rep Randy has. All you have to do is say his name and I know it will be junk I don't care what technolagy he is useing it will be done wrong with as many corners cut to save him money as he can get away with. :ack2: E-Bay is probly the only way he can dump'em. Buyer be waer

[Offshore Ginger]

Personally guys i wouldn't have one shoved up my a$$ .:ack2::ack2::ack2::ack2::ack2::ack2: JUNK !!!!!!!!!!!!!!!!!!!!!!

[northernoffshore]

I wonder which california co. will end up with the molds?

[catmando]

Cat, $500,000 is just an opening bid. No idea what the actual reserve is.
That's what I meant; bidding starts at 500k.

[Steve 1]

I am presently working on a Profile cat and can not believe how poorly the boat is construscted :ack2:


He has got to be kidding I just looked at the Photos in his propaganda sheet and I see NO evidence of resin transfer/Injection as claimed (that would require a foot thick steel mold to handle the pressure) or even an rudimentary homemade Infusion attempt (Flanges were covered with crap) just sloppy hand contact on what appears to be Balsa with some Red MEKP initiated ester resin system ,not epoxy in the Photo.

[Sea-Dated]

We had a couple of friend by new Profile's a few years ago and I could not believe all the stress cracks after 1 season on Grand. They were the 29 or 30 ft mid cabin.

[cosmic12]

He has got to be kidding I just looked at the Photos in his propaganda sheet and I see NO evidence of resin transfer/Injection as claimed (that would require a foot thick steel mold to handle the pressure) or even an rudimentary homemade Infusion attempt (Flanges were covered with crap) just sloppy hand contact on what appears to be Balsa with some Red MEKP initiated ester resin system ,not epoxy in the Photo.

I have had to many bad experince's with him to believe one word he says. What you are saying doen't suprize me in the least.

[Steve 1]

We had a couple of friend by new Profile's a few years ago and I could not believe all the stress cracks after 1 season on Grand. They were the 29 or 30 ft mid cabin.


It gets done right the first time (the easy way)

Or with a Grinder when it reappears back at the shop with an unhappy customer either way the right amount of material is in place in the right area at the end of the day!! Up to the builder.

[cosmic12]

WELL ITS OVER WITH A BIG FAT -O- for bids. I GUESS joe public just ain't that dumb after all. Randy you are stuck with that and I hope it hurts!