Throttle Up CNC Propellers

[ThrottleUp Props]

I have some inventory propellers, that I am going to sell. They are all 5B Bravo Drive CNC Machined Propellers. In the spirit of the swap shop and the holidays I am selling them at $500.00 each. Email me if you interested and also include the size you are looking for.

Happy Holidays!

Julie
Throttle Up Propellers
SAI
727-531-2255

[Sean H]

can we get the gold ones for that price? :sifone:

[ThrottleUp Props]

Oh, the private collection!!!! Safe and Sound of course!

Julie

[Tinkerer]

what do they look like?
are they similar to the maximus?
I would be interested in a pair of L & R 28 pitch.

[ThrottleUp Props]

They are semi-cleavers. The Maximus is a High Rake Round Ear prop...the only thing similar is the Hydro P5-X.

Julie

[Griff]

They are semi-cleavers. The Maximus is a High Rake Round Ear prop...the only thing similar is the Hydro P5-X.

Julie

Don't you mean the regular P5........not the P5-X which is similar to the Maximus???

[ThrottleUp Props]

Correct... I was stating the Maximus IS similar to the P5-X.

The P-5 is an out of the box semi-cleaver, non-CNC propeller. Sorry if that was confussing.

Julie

[VetteLT193]

Do you have them in smaller sizes, like 24 or 25 pitch? I'm running 26 bravo 1's now and I imagine these would need to be smaller in pitch? Are the CNC'ed props basically labbed out of the box because of the precision of CNC?

[ThrottleUp Props]

I am sorry the smallest pitch made is a 28P in Stern Drive props. We do manuacture our outboard overhub props as small as 25P. Our SM props as small as 28-29P in 5B and 6B configurations.

If you are running high rake props there are no CNC versions available to date.

You are also correct in that CNC propellers are machine finished props, tight tolerances vs lab finished props from stock castings.

Julie

[ThrottleUp Props]

I also have some SM props:

5B Speed Master Props:

16.25 x 36P 5B 18 deg 650 HP RH & LH
16.25 x 40P 5B 16 deg 650 HP RH & LH
16.25 x 39P 5B 18 deg 650 HP RH & LH
16.50 x 35P 5B 18 deg 850 HP RH & LH

I will let these go, at a significantly reduced cost as well!

Julie

[VetteLT193]

I am sorry the smallest pitch made is a 28P in Stern Drive props. We do manuacture our outboard overhub props as small as 25P. Our SM props as small as 28-29P in 5B and 6B configurations.

If you are running high rake props there are no CNC versions available to date.

You are also correct in that CNC propellers are machine finished props, tight tolerances vs lab finished props from stock castings.

Julie

Well, with that said... I'm running a 28 Donzi ZX (twin step). I read about the P5's and they sound appropriate for a step bottom boat. In your opinion, do you think I could swing a 28 pitch considering it is CNC'ed Vs my stock Bravo 1's?

[ThrottleUp Props]

What engine package?

If you running the 26P Bravo I props (which are really 25P) at the appropriate RPM then no the 28P props would run about 750 RPM less, s they would be 3 inches taller in pitch and the additional blade. I am afraid they would be to tall for you.

Julie

[bor]

I am running 32 maximus @ 3650 RPM and want to get to 3800 whit dieselpower (320 hp each )also have a set 34 bravo's but no test data yet because of the winter .

What do you think/advise

thx

[ThrottleUp Props]

Bor... tell me a little about the hull please. Also can you tell the diameter of the 32P Maximus props?

Julie

[2112]

Please excuse me if I missed it but did you list the pitch of the 5B Bravo props in Post # 1?

.

[ThrottleUp Props]

Yes sir....I can do that!

5B RH & LH : 15.25 x 27P, 28P, 30P, 31P, 32P and 33P
5B RH & LH : 15.0 x 30P
5B RH & LH : 15.50 x 32P

5B RH 15.25 x 29P
5B RH 15.50 x 33P
5B RH 15.25 x 30P

Thanks for asking!

Julie

[2112]

Did you tell me to subtract 2" of pitch when going from 4B to 5B?

15.25" diameter will fit an XR -2" sportmaster correct?

.

[fund razor]

You're an individual, private seller, right Julie? I was doing a little moderating in here (kind of lazy really) and wondered.

Thanks.

[fund razor]

Ok, so I am done wondering and since I have such little authority... (this is it.... swap) I have decided by proclimation that since I just called you "Julie" you are obviously an individual private seller.

So Merry Christmas and make sure to advertise on SeriousOffshore.com when you plan your 2010 marketing campaign. :)

[ThrottleUp Props]

Yes Sir, I THANK YOU!!!!! Thats why the Bravo Props are $500.00, to comply with the Swap rules!

They are my private collection, which is why I can sell them for $500.00 each!

Julie

[lowblue320]

I have a 35 motion with 575 and running Bravo 1 36's, will these work and whats the gain?

[imco offshore]

julie how u doing baby girl,,,, can you please explain the gold coating ? i,v had a couple of people ask and i couldn,t answer,,properly

[fund razor]

Yes Sir, I THANK YOU!!!!! Thats why the Bravo Props are $500.00, to comply with the Swap rules!

They are my private collection, which is why I can sell them for $500.00 each!

Julie

Have a nice holiday. :cheers2:

[2112]

Did you tell me to subtract 2" of pitch when going from 4B to 5B?

15.25" diameter will fit an XR -2" sportmaster correct?

.

Can you give us the formula on dropping pitch for adding a blade?

.

[ThrottleUp Props]

I have a 35 motion with 575 and running Bravo 1 36's, will these work and whats the gain?

Motions can perform well with Semi-cleaver Propellers. The owner of Motion recently called me a little and we discussed this. Your 36P props are not a real efficeint pitch, for Bravo I propeller series. I would think you would benefit greatly from semi-cleavers. But, before jumping in can you tell me the year of the hull and your performance data with the Bravo I props, please?

Julie

[ThrottleUp Props]

julie how u doing baby girl,,,, can you please explain the gold coating ? i,v had a couple of people ask and i couldn,t answer,,properly

Its all going so WELL, George! Thanks for asking.

The Gold Coating on the props is a PVD coating that has titanium in it. This is what give it it's gorgeous color. PVD is short for "Particulate Vapor Deposition".

Happy Holidays to both of you George!

Julie

[ThrottleUp Props]

Have a nice holiday. :cheers2:

I wish you the very same, Fund!:cheers2:

Happy Holidays!

Julie

[ThrottleUp Props]

Can you give us the formula on dropping pitch for adding a blade?

.

Yes, that is indeed the formula, if you are currently running Bravo 1 props. Bravo 1 props are one inch less than is stamped, on the propeller.

When you add a blade you will reduce one inch of pitch to compensate for the increase drag of the additional blade.

So... if you are running Bravo I props and want to add a blade you will reduce 2 inches of pitch.

If you are running propellers other than Bravo 1 prop then simply reduce one inch of pitch when adding a blade.

Julie

[imco offshore]

is it bling or does it have a practical purpose? and what does it cost...

[ThrottleUp Props]

Can you give us the formula on dropping pitch for adding a blade?

.

Here you go:

When you add a blade you will reduce one inch of pitch to compensate for the increase drag of the additional blade.

The only exception to the rule, is if your running Bravo I props.

Julie

[ThrottleUp Props]

is it bling or does it have a practical purpose? and what does it cost...

Its got SERIOUS Bling factor !

We are still testing the propellers to determine in a scientific manner the benefits.

But, I can tell this to date. The PVD coating makes the propellers STRONGER! So, this of course would allow us to go thinner and with the PVD we can re-gain some of this strength back. This of course means greater Durability and Life Expectancy, for the propellers. Because we all know that thin is fast.....but we also know that thin propellers have a shorter life expectancy!

The coating depends upon the propeller style. SM are an additional $1000.00 each for the PVD application.

Thanks.

Julie

[Team Tsunami]

PM sent instead.

[2112]

Yes, that is indeed the formula, if you are currently running Bravo 1 props. Bravo 1 props are one inch less than is stamped, on the propeller.

When you add a blade you will reduce one inch of pitch to compensate for the increase drag of the additional blade.

So... if you are running Bravo I props and want to add a blade you will reduce 2 inches of pitch.

If you are running propellers other than Bravo 1 prop then simply reduce one inch of pitch when adding a blade.

Julie



P/M sent.


.

[Sean H]

is it bling or does it have a practical purpose? and what does it cost...

It does it all.... :bump:

[ThrottleUp Props]

Oh thank you Sean....those are my beauties!

Julie

[ThrottleUp Props]

I have 6B props as well. I will post them in the "Showroom" in accordance to the swap shop rules. Thanks Fund.

Julie

[ThrottleUp Props]

Here is the link.

http://www.seriousoffshore.com/forums/showthread.php?t=12930

Julie

[Steve Miklos]

Julie call me on 27 28 30
Thanks
Steve

[offthefront]

Julie .... potential Victim

http://www.offshoreonly.com/forums/wanted/221427-wanted-5-blade-props.html

[ThrottleUp Props]

Thank you OTF!

Julie

[ThrottleUp Props]

Julie call me on 27 28 30
Thanks
Steve

Sorry I am running behind today.....I will call you in the morning.

Julie

[bor]

Bor... tell me a little about the hull please. Also can you tell the diameter of the 32P Maximus props?

Julie

It ,s a 1989 32 hustler straight v- hull whit notched transom , there stock 32 maximus 15 5/8 diameter

thx ,

Bor

[ThrottleUp Props]

It ,s a 1989 32 hustler straight v- hull whit notched transom , there stock 32 maximus 15 5/8 diameter

thx ,

Bor

Hey Bor,

High rake props are really best for your hull....however if you feel you can afford more stern lift, then we can look a your data. Traditionally, Older Conventional Vee Bottom Hulls, appreciate the high rake, as the propellers will help to carry the bow (since you have no steps to assist).

Julie

[bor]

Hey Bor,

High rake props are really best for your hull....however if you feel you can afford more stern lift, then we can look a your data. Traditionally, Older Conventional Vee Bottom Hulls, appreciate the high rake, as the propellers will help to carry the bow (since you have no steps to assist).

Julie

Hey Julie,

The numbers are quite good have a slip number of 7 % .
first thing when the snow is gone here I am going to try the bravo,s and get some more data also gonna get the exact weight of the boat .
also want to try some 1,36 gear ratio to get the prop speed a little up

When I have some more data I will contact you again

thx bor

[ThrottleUp Props]

Sounds great bor!

Julie

[ThrottleUp Props]

Julie call me on 27 28 30
Thanks
Steve

Steve,

I have sent you a PM!

Julie

[ThrottleUp Props]

I still have several sets available....now that the holidays are over, lets talk performace!

Julie

[2112]

Hey Thanks for the props Julie,

They are gorgeous. A guy needs a sweet deal once in a while. :rolleyes:

.

[fastlane40]

Hi Julie,i have a set of your P5x in 32.they are about 750 rpm off the where i want to be.What would you suggest in the P5.Running slightly altered Bravo 32's at the moment @ around 6000.Or am i better going with a set of 30 P5x's?

[Team Tsunami]

I still have several sets available....now that the holidays are over, lets talk performace!

Julie

Clear out your PM's Julie!

[ThrottleUp Props]

Hey Thanks for the props Julie,

They are gorgeous. A guy needs a sweet deal once in a while. :rolleyes:

.

You are so very welcome!!!! I think your boat is going to run very well with the props.

Thanks!

Julie

[ThrottleUp Props]

Hi Julie,i have a set of your P5x in 32.they are about 750 rpm off the where i want to be.What would you suggest in the P5.Running slightly altered Bravo 32's at the moment @ around 6000.Or am i better going with a set of 30 P5x's?

So are they a little tall for you, I assume? If you are shy on RPM then lets get you in a set of semi-cleavers and light her up!!!!

If you wish, PM the details to me and I'll get started.

Julie

[DCB F32]

Hey Julie,

I have a DCB F32 with Teague 800's EFI . Imco SC drives.

Current props are 4 Blade Bravo Stamped 37 Pitch. They are labbed. I purchased the boat used,the props were supposedly done by Merc Racing.

The boat I am told has done 137 with these props. I have been to 130 with stick left. The boat rolls over fairly well but I am thinking a 5 Blade prob may be better for crusing.

Thinking about maybe a 34 5 blade. Would any of these props you have be suitable.

Thanks,

Jeff

[ThrottleUp Props]

Yes I think I may have something for you. Why dont you PM me your performance data so I can take a look. I am curious because it is very rare when someone tells you they are running a 37P Bravo! Almost unheard of actually.

Julie

[DCB F32]

Yes I think I may have something for you. Why dont you PM me your performance data so I can take a look. I am curious because it is very rare when someone tells you they are running a 37P Bravo! Almost unheard of actually.

Julie

PM sent

[ThrottleUp Props]

Thanks look forward to talking with you!

Julie

[Team Tsunami]

31's are sold!:D Thanks Julie for all your help. Cant wait to try them out....now its really going to be a long next couple of months!

[ThrottleUp Props]

They are on their way~!

Julie

[SLOWRIDE-388]

Do you have any 5 blade props for #6s? looking for 18x34.
thanks,
Ben

[ThrottleUp Props]

Here is what I have left from my private collection.

16.25 x 36P 5B 18 deg 650 HP RH & LH
16.25 x 40P 5B 16 deg 650 HP RH & LH
16.25 x 39P 5B 18 deg 650 HP RH & LH

Now we, Throttle Up Propellers/SAI can make you a custom set of propellers as well.

Julie

[ThrottleUp Props]

Bringing this back around. I still have several sets of these available.

I do not want to carry these around with me.

If your looking for a set of CNC props, back ups or some smokin fast wheels you should call me. These are my private collection.

Julie

[Ragged Edge]

Anything left for a Bravo set up. 2006 Fountain 35 Lightning, twin step, with 525's ??? Non lab 32 Bravos spin 53-5400, those Hydro P5 Plus's, the Hering like ones, spun up @ 5400 (+/-).

[motion35]

tried calling no answer

sent pm

[ThrottleUp Props]

Anything left for a Bravo set up. 2006 Fountain 35 Lightning, twin step, with 525's ??? Non lab 32 Bravos spin 53-5400, those Hydro P5 Plus's, the Hering like ones, spun up @ 5400 (+/-).

Sorry RE....Yes I have some nice 6B that you may want to consider.


What pitch were the P5 Plus props?

Julie

[ThrottleUp Props]

tried calling no answer

sent pm

I was in and out of the office yesterday. We have begun the final moving process so things are a bit hectic. If you don't get me, make sure to leave a message and I WILL call you back.

Julie

[SKRAMER]

Got anything that would be like Labbed 4 blade 28 Bravos? Thanks Scott

[ThrottleUp Props]

Hello Scott,

Unfortunately, we do not manufacture high rake Bravo I style props. Sorry.

Julie

[SKRAMER]

Hello Scott,

Unfortunately, we do not manufacture high rake Bravo I style props. Sorry.

Julie

Anything that would work better then a bravo?

[ThrottleUp Props]

Are we talking about props for your 89' Cafe?

Julie

[ThrottleUp Props]

I am getting ready to put these in storage...making the big move, so they have to go. If any of your are looking for any of these give me a call!!!

Julie

[SKRAMER]

Are we talking about props for your 89' Cafe?

Julie

Yes.. I'm back to stock setup. No shorties..

[ThrottleUp Props]

Skramer

You are running the appropriate propellers for our hull, a conventional deep vee hull. These hulls tend to appreciate high rake props...they really help with the bow lift.

Sorry I don't have them as of yet.

Julie

[cowisl]

What about a 38 Powerplay with twin 525's? Currently running labbed 30" bravo I's.

[runninhotracing]

Bringing this back around. I still have several sets of these available.

I do not want to carry these around with me.

If your looking for a set of CNC props, back ups or some smokin fast wheels you should call me. These are my private collection.

Julie

Jules look around and see what ya'll gots in 16.5 X 39 or 40s ???? Green CA$H in a fed ex envelope

[Ragged Edge]

Sorry RE....Yes I have some nice 6B that you may want to consider.


What pitch were the P5 Plus props?

Julie


Like 31's, but these were the Donzi / Herring clone experiment. So what you got? What are the 6 blades?

[mrdwp]

I have some inventory propellers, that I am going to sell. They are all 5B Bravo Drive CNC Machined Propellers. In the spirit of the swap shop and the holidays I am selling them at $500.00 each. Email me if you interested and also include the size you are looking for.

Happy Holidays!

Julie
Throttle Up Propellers
SAI
727-531-2255
do you have anything left in 5 blade for 6's

[ThrottleUp Props]

What about a 38 Powerplay with twin 525's? Currently running labbed 30" bravo I's.

Sorry for the delay.....missed this one all together.

38' Powerplay runs well with Maximus props. If you want a really agressive set up then you could consider semi-cleavers with Diffuser Rings and flares.

Julie

[ThrottleUp Props]

Like 31's, but these were the Donzi / Herring clone experiment. So what you got? What are the 6 blades?

I do have a beautiful pair of 29P props.....with flare rings.

Julie

[ThrottleUp Props]

Jules look around and see what ya'll gots in 16.5 X 39 or 40s ???? Green CA$H in a fed ex envelope

I don't have anything thick enough for your HP in this collection. Call me I have an idea.

Julie

[tim brown]

do you have a pair of slightly uses b1 28 4 blades ? Tim

[ThrottleUp Props]

Sorry, no Bravo I props. Try Cobra Power, in Miami.... he may have some.

Julie

[wildthing]

Julie,

What is let in the 5 blades.

[ThrottleUp Props]

I am assuming you are asking about Stern Drive props? I will check and please correct me if I am wrong on drive type.

Julie

[wildthing]

You are correct.

[ThrottleUp Props]

Thanks. What diameter and pitch are you looking for?

Julie

[wildthing]

I will have to check, this is for a friend. He did say 27 but not sure on Dia. It is for a 1989 Cigarette Bullet w/Twin Mecury 575sci with Bravo XR drives. The boat came with29 3 blades spinning 4500 at 72 mph.

[ThrottleUp Props]

The smallest we make in a 5B or 6B is a 28P. I am not sure semi-cleavers are right for him though.

Julie

[wildthing]

Thanks Julie, He talked to Hydromotive and they said a 5 blade 28. Not of which one and the spec's.

[ThrottleUp Props]

I will have to check, this is for a friend. He did say 27 but not sure on Dia. It is for a 1989 Cigarette Bullet w/Twin Mecury 575sci with Bravo XR drives. The boat came with29 3 blades spinning 4500 at 72 mph.

Lets start with his current equipment and go from there.

Julie

[tcuda499]

julie,
1999 38 scarab avs. 500efis 550 hp running b1 30pitch to 5100rpm at 80mph. X dimension is really high and really slow getting out on plane. would your semi cleavers props work for me? thanks

[ThrottleUp Props]

tcuda499,

Your hull really appreciates high rake props, like the Bravo 1 or the Hydromotive P5-X. The semi-cleavers cleavers make it a real bear to plane. I would try to find some P5-X props in all honesty.

Julie

[tcuda499]

thanks Julie:cheers2:

[ThrottleUp Props]

You are more than welcome!!!!!!

Julie