Nordicflame
12-02-2009, 01:06 PM
Have pics of everything on request...:USA:
Thanks,
Dave
MEFI distributor $75, new pickup and module
TB-IV harness $70pr
TB-IV distributors $100pr
(2) Fluidamprs Int 8” balancers. One looks perfect, one has a sleeve on the seal surface(?) $75 for both. Primed and ready to paint your color
(2) HP20 TB-V modules 840130A4 (5450 rev limit) and knock sensor setups $200pr
(2) Merc Racing oil thermostat assembly setups, complete with filter adapter and hoses for Mk IV $400pr Excellent
(2) Mercury Racing blue HP500 alternators work perfect $90pr
(2) Lifting eyes (head mount, mounted for pictures only) TCM TCMLFTUNIV $40 (1 set)
(2) Rear mount Merc electrical brackets p/n 14037 $50 pr
Crower Enduro 4.500 crank (ext balanced to 2398bw 502 ext flywheel), will include Mallory for internal balance if required) dyno time only ...PM for deatils
oil, tranny or PS coolers. 2” x ~12” OK shape / do not leak $30 both
(4) S pipes (cast 496HO setups) $100
(8) 4” Merc exhaust hose connectors with clamps $70all
(2) near new drive reservoir bottles (no brackets) $40pr
Full set of Gaffrig II gauges for twin set up. (2) tachs, (2) speedos, (2) oil pressure, (2) water temp, (2) volt meter, (3) fuel level. All perfect and include mounting hardware $375 for all
Merc Water pump assembly for serpentine (pulley and main hose) 454/502 MPI $40
Merc Water pump, no leaks $25
Isky 8005A springs and retainers less than 12 hours perfect HP500/500EFI replacements, went to bigger cam) $75
(1 set) Dented Gibson transom mounts, can be mounted with steering ram dents down. $60
(2) Merc HP500/Bulldog fuel pumps with fittings, work perfect $60pr
New shift cable 865437A02 (cable only as shown) $30
280 K-Plane plates, like new, not a scratch $200
Merc Cool Fuel (496HO) less than 25 hours 864650 $200
(1) 496HO intake assembly, complete with everything except TB less than 25 hours $250
(2) Edelbrock 4150 1” carb spacers, phenolic $25 pr
(2) 4150 sandwich style throttle mounts $30 pr
Thanks,
Dave
MEFI distributor $75, new pickup and module
TB-IV harness $70pr
TB-IV distributors $100pr
(2) Fluidamprs Int 8” balancers. One looks perfect, one has a sleeve on the seal surface(?) $75 for both. Primed and ready to paint your color
(2) HP20 TB-V modules 840130A4 (5450 rev limit) and knock sensor setups $200pr
(2) Merc Racing oil thermostat assembly setups, complete with filter adapter and hoses for Mk IV $400pr Excellent
(2) Mercury Racing blue HP500 alternators work perfect $90pr
(2) Lifting eyes (head mount, mounted for pictures only) TCM TCMLFTUNIV $40 (1 set)
(2) Rear mount Merc electrical brackets p/n 14037 $50 pr
Crower Enduro 4.500 crank (ext balanced to 2398bw 502 ext flywheel), will include Mallory for internal balance if required) dyno time only ...PM for deatils
oil, tranny or PS coolers. 2” x ~12” OK shape / do not leak $30 both
(4) S pipes (cast 496HO setups) $100
(8) 4” Merc exhaust hose connectors with clamps $70all
(2) near new drive reservoir bottles (no brackets) $40pr
Full set of Gaffrig II gauges for twin set up. (2) tachs, (2) speedos, (2) oil pressure, (2) water temp, (2) volt meter, (3) fuel level. All perfect and include mounting hardware $375 for all
Merc Water pump assembly for serpentine (pulley and main hose) 454/502 MPI $40
Merc Water pump, no leaks $25
Isky 8005A springs and retainers less than 12 hours perfect HP500/500EFI replacements, went to bigger cam) $75
(1 set) Dented Gibson transom mounts, can be mounted with steering ram dents down. $60
(2) Merc HP500/Bulldog fuel pumps with fittings, work perfect $60pr
New shift cable 865437A02 (cable only as shown) $30
280 K-Plane plates, like new, not a scratch $200
Merc Cool Fuel (496HO) less than 25 hours 864650 $200
(1) 496HO intake assembly, complete with everything except TB less than 25 hours $250
(2) Edelbrock 4150 1” carb spacers, phenolic $25 pr
(2) 4150 sandwich style throttle mounts $30 pr