Cam recommendations

[Dude! Sweet!]

So it looks like we're going to go with mechanical injection on my race 28 (free, indefinate loan of a complete Crower set up). I need recommendation regarding the cam though.

Anyone have any thoughts or suggestions (either of a specific cam or of "the guy" to talk to regarding mechanically injected marine motors)?

Basic facts...

Motor is 572 cid, (4.25 stroke x 4.625 bore) 9:1 compression. Has Dart 360 heads (ported, don't recall final valve size though). Boat is approximately 6000#. Running an Imco SC drive. I'd like to keep RPM range in the 4500 - 5700 range. Solid lifter is fine.

Thanks!

 

[PatriYacht]

Those heads are better suited to a drag race engine that revs to 8000 rpm. If I were caming it, I would use a modern solid roller and spin it over 6000.

 

[Chris]

Call Bob Madara and save yourself a ton of headaches.

 

[Wobble]

Call Bob Madara and save yourself a ton of headaches.

+1

Bob will be your best choice.

try this number 585-654-8583

 

[Dude! Sweet!]

Bob in Rochester NY?

 

[Dude! Sweet!]

Those heads are better suited to a drag race engine that revs to 8000 rpm. If I were caming it, I would use a modern solid roller and spin it over 6000.

Yah, that's what I've heard, but that's what I got... Trying to do this one with alligator arms... :sifone: