Results 1 to 16 of 16
  1. Collapse Details
    What's the best aftermarket brake system for a 2500HD Duramax
    #1
    Registered .38Special's Avatar
    Join Date
    Mar 2009
    Location
    Michigan
    Posts
    225
    I'm at 101,500 miles on original brake pads/rotors, etc... on my 04 GMC 2500HD 4x4. But the time has come. Because I tow the boat a lot I want to go with something big/safe/reliable for replacements. What have you guys used to replace OEM GMC brakes? Is there a complete system that works good? My boat trailer has surge brakes, which leaves a lot to be desired with a 10,000lb boat on top of it. Any input appreciated.

    Thanks,
    Nick
    Reply With Quote
     

  2. Collapse Details
     
    #2
    I bought all the high-end GBC stuff. Pads went away quick and the rotors warped almost immediately. I replaced them with Autozone Chinese crap and their full ceramic pad. Stops strong and no pulsation. The rotors have been on for 80K and I get 35-40K out of the pads.

    One of the best upgrades you can do is replace the stock rubber lines with Goodridge braided stainless kits. You get much better pedal feel.

    Get a good electric/hydraulic setup for your rig and stop white-knuckling it. You can't get enough brakes under your truck to match the results.
    Reply With Quote
     

  3. Collapse Details
     
    #3
    Registered .38Special's Avatar
    Join Date
    Mar 2009
    Location
    Michigan
    Posts
    225
    Thanks Chris. I'm actually trying to sell the trailer and my next one will have electric/hydraulic for sure.
    Reply With Quote
     

  4. Collapse Details
     
    #4
    Registered PlumCrazy's Avatar
    Join Date
    Nov 2008
    Location
    Minnesota
    Posts
    63
    I highly recommend the Power Slot Cryo Rotors from frozenrotors.com. I've had them on my Suburban 2500 for about 40K miles and absolutely love them. No wear, whatsoever. The price is only a little more than a standard rotor. They don't stop any better, but they last much longer. I found out about them from a friend that raced a Subaru rally car. He went through rotors every race. But, the cryogenically treated rotors lasted a full season.
    Reply With Quote
     

  5. Collapse Details
     
    #5
    Charter Member
    Join Date
    Oct 2008
    Location
    New Jersey
    Posts
    39
    If you got over 100,000 miles on the originals, why wouldn't you just buy OEM? Unless it doesn't stop good. I changed the pads on my F250 at 100,000 miles and they still could have gone another 50,000. The rotors all looked good too. I just bought new pads from Ford and they lasted until the motor died.
    Reply With Quote
     

  6. Collapse Details
     
    #6
    Registered PlumCrazy's Avatar
    Join Date
    Nov 2008
    Location
    Minnesota
    Posts
    63
    Power Slots
    Attached Thumbnails Attached Thumbnails powerslot.jpg  
    Reply With Quote
     

  7. Collapse Details
     
    #7
    Founding Member / Contributor 2112's Avatar
    Join Date
    Oct 2008
    Location
    Socialist Republic of Washington State
    Posts
    1,027
    Quote Originally Posted by PlumCrazy View Post
    Power Slots
    Is that on a tow rig or a sports car?
    32' Fever (Off to Syracuse) and 36"Gladiator; FORD powered
    Cause somebody has to!
    Reply With Quote
     

  8. Collapse Details
     
    #8
    Registered PlumCrazy's Avatar
    Join Date
    Nov 2008
    Location
    Minnesota
    Posts
    63
    Quote Originally Posted by 2112 View Post
    Is that on a tow rig or a sports car?
    What do you mean? It's just a simple tow rig.

    Reply With Quote
     

  9. Collapse Details
     
    #9
    Founding Member / Contributor 2112's Avatar
    Join Date
    Oct 2008
    Location
    Socialist Republic of Washington State
    Posts
    1,027
    Quote Originally Posted by PlumCrazy View Post
    What do you mean? It's just a simple tow rig.

    um... looks like a very basic mode of towing.
    .
    32' Fever (Off to Syracuse) and 36"Gladiator; FORD powered
    Cause somebody has to!
    Reply With Quote
     

  10. Collapse Details
     
    #10
    I've had good luck with Brembo slotted rotors and Hawk LTS pads on my Denali. Much better than stock.
    Reply With Quote
     

  11. Collapse Details
     
    #11
    Charter Member Wobble's Avatar
    Join Date
    Oct 2008
    Location
    Banana Bend, Texas 29 50 49.84N, 95 05 17.46W
    Posts
    969
    It is hard to beat GM's oem brake pads and rotors IMHO at least as far as the
    Duramax equipped trucks are concerned. My 2006 at 92k miles still has nearly half the original front brakes left.
    Mark
    Everybody should believe in something; I believe I'll have another drink.
    Reply With Quote
     

  12. Collapse Details
     
    #12
    Charter Member
    Join Date
    Oct 2008
    Location
    Georgetown, TX
    Posts
    426
    Quote Originally Posted by Wobble View Post
    It is hard to beat GM's oem brake pads and rotors IMHO at least as far as the
    Duramax equipped trucks are concerned. My 2006 at 92k miles still has nearly half the original front brakes left.


    143k on originals. Pads are fine, but rotors are due. Next week.
    Boat-less...
    Reply With Quote
     

  13. Collapse Details
     
    #13
    Registered slpcamaross97's Avatar
    Join Date
    Feb 2009
    Location
    Lapeer, MI
    Posts
    190
    OEM Pads. or AC delco Ceramic pads. both are the same run them on all my trucks. IE 3 3/4 ton trucks.
    Reply With Quote
     

  14. Collapse Details
     
    #14
    Quote Originally Posted by Chris View Post
    One of the best upgrades you can do is replace the stock rubber lines with Goodridge braided stainless kits. You get much better pedal feel.
    where can I buy these? my peddle feel is getting wierd lately, in fact I ran into the back of someone last month during a panic stop... thought it would never stop... trans dropped to first harshly, ABS kicked in, and it just kept going...
    Reply With Quote
     

  15. Collapse Details
     
    #15
    Tire Rack carries them.

    You probably have other issues. I would suggest a full system drain and fluid replacement. make CERTAIN that you have the correct fluid- they're not all compatible. I had a problem like this once- refaced the rotors and broke the glaze on the pads, then reseated them. Went away.

    But the lines greatly increase pedal feel. No more sponge.
    Reply With Quote
     

  16. Collapse Details
     
    #16
    front and rear?
    Reply With Quote
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •