Do the IMCO lowers have a port for the speedo pitot to connect? I'd like to still have my water pressure speedometer functional along with my GPS if possible, but need to get a shorter lower. Hopefully I don't have to add an external pickup.
Thread: IMCO Lower question
Results 1 to 6 of 6
-
01-21-2009 07:59 PM
-
01-21-2009 08:02 PM
They haven't in the past.
-
01-22-2009 08:33 AM
Didn't think so. I guess I could just swap my other Speedo out to a GPS as well.
-
- Join Date
- Oct 2008
- Location
- I live in Holland, Mi. Along the Lake Michigan shore.
- Posts
- 36
01-22-2009 08:03 PMNo Matt, there is no provision for the speedo. That port on the lower is used to supply water to the upper on the Imco SC drive.. If you hooked your speedo to it.. it would show you are going real fast, I believe..
-
Elitemarine@sbcglobal.net
www.elitemarineonline.com - Livorsi,CP,Lifeline,CMI,Box Anchor & more!
-
- Join Date
- Nov 2008
- Posts
- 285
05-23-2009 09:50 PMI modified mine to use the stock spedo.
I plugged the hole that goes into the low water pickup section.
I then drilled and installed a pitot tube.
I used a cut away to see where to drill.
Works great.