Page 4 of 5 FirstFirst 1 2 3 4 5 LastLast
Results 61 to 80 of 83
  1. Collapse Details
     
    #61
    The super-singles are becoming more available, but nowhere near that of standard 22.5's. 19.5's aren't that common either. The good news is that these tires rarely fail- and when they do it's typically a result of improper inflation and on hot days. Heat kills tires. Your rig is never going to come close to max load so they'll always run cool. We had alot of blowouts on 19.5's when we had low-pro chassis- so I switched. I've had one tire failure in 1mm+ miles since going to the larger rim.

    The emergency road service guys are geared up to service OTR tractors. They really have little to service the 3126's or C-7's. There are so few out on the open highways. I buy Freightliers with Cats for our fleet for the single reason that there are so many 24/7/365 FL and Cat shops on the interstates. Every one of our trucks carries a list of all the FL and CAT facilities in their operating areas. I've never had an ERS call that didn't end with a tow to one or the other.
    Reply With Quote
     

  2. Collapse Details
     
    #62
    Quote Originally Posted by outriggers View Post
    Very Nice! Can you order a F650 from the factory with 4 wheel drive? It seems on the 650.com site 4WD is about a 40K option. Doug
    You can order it, but you wouldn't want to spend much time in it. They'll beat your brains out. Most guys I know with mediums have them ballasted- they put steel plates in the back to make them ride better and to put some weight on the drive axle for ramps.

    Look at it this way- that truck that plows the snow from your streets and highways is 2wd.
    Reply With Quote
     

  3. Collapse Details
     
    #63
    Registered Bgchuby01's Avatar
    Join Date
    Oct 2008
    Location
    Los Angeles, Calif
    Posts
    764
    I know with the M-2 Freightliners the 4.x 4 option from the factory is 40,000. I agree with chris that you need to add ballast to the bed of the truck to make it ride better and for greater traction. Because you have air ride on the rear of the truck you could also move the boat foward to add tongue weight to make the back of the truck get more grip. Do to the air ride you would not even notice it but would get more traction on the rear.
    Reply With Quote
     

  4. Collapse Details
     
    #64
    Charter Member BraceYourself's Avatar
    Join Date
    Oct 2008
    Location
    Ohio
    Posts
    398
    This truck has a push button chain system I could engage if needed. Also the airride can be dumped in the back by the push of a button in the cab and this will load the rear axle. Another pic.
    One pic is before the cap installation.


    Question is it better to have the ball a little high or a little low in my situation. Air ride, etc..... I can have different hitches made and wondered if it would be better to be a little high to give more tounge weight, I have a triple axle trailer????????????????????????????????????????????????
    Attached Thumbnails Attached Thumbnails DSC01994.JPG   DSC01930.JPG  
    Reply With Quote
     

  5. Collapse Details
     
    #65
    Registered MattBMiller's Avatar
    Join Date
    Nov 2008
    Location
    Michigan
    Posts
    2,160
    What is the push button chain system?
    Reply With Quote
     

  6. Collapse Details
     
    #66
    Charter Member BraceYourself's Avatar
    Join Date
    Oct 2008
    Location
    Ohio
    Posts
    398
    Quote Originally Posted by MattBMiller View Post
    What is the push button chain system?

    Used more on emergency vehicles, illegal in some states. All you do is hit a button in the cab and the chains engage the tires and within a few seconds your driving on the chains. Could be used on a frozen lake too. I usually put bungie cords around chains to keep them from dragging. Or use them to really **** up someones driveway.
    Attached Thumbnails Attached Thumbnails scott2.jpg  
    Reply With Quote
     

  7. Collapse Details
     
    #67
    [QUOTE=BraceYourself;76695]This truck has a push button chain system I could engage if needed. Also the airride can be dumped in the back by the push of a button in the cab and this will load the rear axle. Another pic.
    One pic is before the cap installation.




    Way C@@l Jeremy Jr mentioned the chain system set-up and said its some pretty trick chit , good luck P.S. were gonna bring ya'll a new camera up with us this spring





    ITS A SKATER NATION !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Reply With Quote
     

  8. Collapse Details
     
    #68
    Registered Perlmudder's Avatar
    Join Date
    Nov 2008
    Location
    Toronto
    Posts
    2,780
    Quote Originally Posted by BraceYourself View Post
    Used more on emergency vehicles, illegal in some states. All you do is hit a button in the cab and the chains engage the tires and within a few seconds your driving on the chains. Could be used on a frozen lake too. I usually put bungie cords around chains to keep them from dragging. Or use them to really **** up someones driveway.
    now thats cool!!
    Reply With Quote
     

  9. Collapse Details
     
    #69
    Registered JayFan's Avatar
    Join Date
    Jan 2009
    Location
    East Lyme, CT
    Posts
    41
    One word for that....SWEET!
    Reply With Quote
     

  10. Collapse Details
     
    #70
    Charter Member Sydwayz's Avatar
    Join Date
    Oct 2008
    Location
    All over da place.
    Posts
    699
    Quote Originally Posted by BraceYourself View Post
    Used more on emergency vehicles, illegal in some states. All you do is hit a button in the cab and the chains engage the tires and within a few seconds your driving on the chains. Could be used on a frozen lake too. I usually put bungie cords around chains to keep them from dragging. Or use them to really **** up someones driveway.

    They are called On-Spots Tire Chains. They do work well as long as they are timed right and the back end of the vehicle is heavy. I've used them many times on fire trucks and ambulances. They also put them on school buses. With those higher frame vehicles, they are usually on a hydraulic arm that keeps them up away from the ground when not engaged.
    Brian Tillett; Active Thunder Factory Representative
    wwwActiveThunderBoats.com
    brian(a)activethunderboats.com
    Reply With Quote
     

  11. Collapse Details
     
    #71
    I see them alot on oil delivery trucks in our area. Don't they spin around from a friction wheel when they are engaged? Doug
    Reply With Quote
     

  12. Collapse Details
     
    #72
    Answered my own question. Automatic tire chains, Onspot has alot of info and videos. I have never seen them on a pickup, but I guess their available. Doug http://www.onspot.com/
    Reply With Quote
     

  13. Collapse Details
     
    #73
    Infamous catmando's Avatar
    Join Date
    Nov 2008
    Location
    Arlington, Tx.
    Posts
    510
    The guy who thought of that must be a bloody genius.
    Reply With Quote
     

  14. Collapse Details
     
    #74
    Registered danh63's Avatar
    Join Date
    Nov 2008
    Location
    Ohio
    Posts
    149
    That is pretty slick!
    Reply With Quote
     

  15. Collapse Details
     
    #75
    Nice Bada$$!
    Reply With Quote
     

  16. Collapse Details
     
    #76
    Quote Originally Posted by catmando View Post
    The guy who thought of that must be a bloody genius.
    We agree on some thing! That is bad azz!

    BraceYourSelf- post some more of your toybox (Lambo)!!
    Reply With Quote
     

  17. Collapse Details
    tongue
    #77
    Registered BUTCH RYAN's Avatar
    Join Date
    Nov 2008
    Location
    GROSSE ILE,MI
    Posts
    15
    Quote Originally Posted by BraceYourself View Post
    This truck has a push button chain system I could engage if needed. Also the airride can be dumped in the back by the push of a button in the cab and this will load the rear axle. Another pic.
    One pic is before the cap installation.


    Question is it better to have the ball a little high or a little low in my situation. Air ride, etc..... I can have different hitches made and wondered if it would be better to be a little high to give more tounge weight, I have a triple axle trailer????????????????????????????????????????????????
    you have to have the ball height set so the equalizers on your trailer springs ride level.
    Reply With Quote
     

  18. Collapse Details
     
    #78
    Founding Member / Contributor 2112's Avatar
    Join Date
    Oct 2008
    Location
    Socialist Republic of Washington State
    Posts
    1,027
    Quote Originally Posted by outriggers View Post
    Answered my own question. Automatic tire chains, Onspot has alot of info and videos. I have never seen them on a pickup, but I guess their available. Doug http://www.onspot.com/

    My computer would not play the video but I saw the simpler graphic showing how the chain is jut thrown under the tire, rotating around for another pass.

    How freaking cool is that?

    That is ingenious. How do you determine if it is legal in your state? My socialst state has an 8 billion dollar deficit so they need as much $$ as possible to fund their wealth redistributors. Traffic ticket writing is way up!
    32' Fever (Off to Syracuse) and 36"Gladiator; FORD powered
    Cause somebody has to!
    Reply With Quote
     

  19. Collapse Details
     
    #79
    Founding Member / Contributor 2112's Avatar
    Join Date
    Oct 2008
    Location
    Socialist Republic of Washington State
    Posts
    1,027
    Chris, I am trying to read between your lines, are you in agreement on the single vs. dually statements? I understand that for most of us, this beast is never going to be taxed doing what we ask it to do.
    32' Fever (Off to Syracuse) and 36"Gladiator; FORD powered
    Cause somebody has to!
    Reply With Quote
     

  20. Collapse Details
     
    #80
    Charter Member Sunsation96's Avatar
    Join Date
    Oct 2008
    Location
    Lake St. Clair
    Posts
    1,025
    That is freakin slick!
    Reply With Quote
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •