Anybody have a source for the k plane bolts that go through the lower part of the ram and have the extended stud for bolting on the trim tab indicator cables....thanks.
Thread: k plane bolts
Results 1 to 10 of 10
-
- Join Date
- Oct 2008
- Location
- south jersey
- Posts
- 155
12-19-2008 03:57 PM
-
- Join Date
- Nov 2008
- Posts
- 340
12-24-2008 06:59 PMMarc at BAM Marine has them. Or Doller Marine. New or used.
-
12-24-2008 07:19 PM
I could not find it on BAMS site. The merc number is 847198 they call it a pin
-
12-25-2008 10:29 AM
Yes, it is hard to find - the tabs & stuff are here:
http://www.mercruiserparts.com/selec...doc_nbr=891720
There are 2 versions of the pin, the 847198 is for the older tabs, there is also the
8M0008641 which is used on the newer tabs. The new tabs have large bushings on the cylinder.
-
12-25-2008 12:48 PM
Marc, your path to quicksilver is different than Mercs. How does one get to that page?
Merry Christmas
-
12-25-2008 03:38 PM
Jim, it's in the accessories here:
http://www.mercruiserparts.com/SelectProductLine.asp
Then trim/tilt/lift here:
http://www.mercruiserparts.com/selec...sp?type_id=ASS
Then 1994 and up here:
http://www.mercruiserparts.com/selec...and+Components
I need to work on making stuff like that easier to find.
Merry Christmas back at ya
-
- Join Date
- Oct 2008
- Location
- south jersey
- Posts
- 155
12-25-2008 03:50 PMThanks guys.
-
12-25-2008 04:55 PM
Marc, Thank you
-
04-23-2009 11:17 AM
Check the Livorsi catalog .
-
- Join Date
- Nov 2008
- Posts
- 89
05-06-2009 01:46 PMMarc its funny this came up.
I used to be able to find it along time ago then the site got rearranged and I lost it thanks for the directions to that page. I now have a shortcut on my desktop