Thread: Prop Pitch!!!

Results 1 to 8 of 8
  1. Collapse Details
    Prop Pitch!!!
    #1
    Registered
    Join Date
    Dec 2009
    Location
    Tampa,Florida
    Posts
    78
    OK !!! I asked this question under the Prop section w/ no replies----I'm going from a 320 HP to over 500 HP in my 25' Baja----What pitch Prop are you guys running on your 25'/27' Baja with the 496---- 375/425 HP !!!.......Thanks!!! Mike !!!!!
    Reply With Quote
     

  2. Collapse Details
     
    #2
    Founding Member / Super Moderator Ratickle's Avatar
    Join Date
    Oct 2008
    Location
    West Michigan
    Posts
    37,266
    Blog Entries
    44
    I'm gonna give you my best guess, based on what some others have run. But, what prop, drive, etc are you running now? If we can get that, then we can get in contact with Brett and see what he's done with similar setups.

    My best guess, you're looking at spinning a 24 or 25 pitch 4 blade with a little lab work.

    You will also need to check your x dimension. Believe it or not, they actually came setup differently as they learned what performed the best. If yours is low, you will not want to have sternlift, and some 4 blades definitely have more than 3 blades. If yours is higher, sternlift from a prop will be somewhat okay, as long as it is not excessive.

    So;

    Current Prop brand, pitch, diameter, model
    X Dimension
    Drive model
    Speed @ RPM
    Getting bad advice is unfortunate, taking bad advice is a Serious matter!!
    Reply With Quote
     

  3. Collapse Details
     
    #3
    Founding Member / Super Moderator Ratickle's Avatar
    Join Date
    Oct 2008
    Location
    West Michigan
    Posts
    37,266
    Blog Entries
    44
    Found your original info in the Prop Tech section


    Quote Originally Posted by 1stoutlaw View Post
    What prop do you guys have driving a 25 outlaw (496/425hp or 502/500hp) I'm replacing a 320hp 6.2 w/ a 502/500plus hp and have a 19Mirage plus---I bought a used 23 plus and if it is too small will get w/bblades to rent a 25 plus AND then buy a brand new one !!!!Thanks !!!!
    Getting bad advice is unfortunate, taking bad advice is a Serious matter!!
    Reply With Quote
     

  4. Collapse Details
     
    #4
    Registered
    Join Date
    Dec 2009
    Location
    Tampa,Florida
    Posts
    78
    Thanks Ratickle----25'-Baja Outlaw had 320 HP/ w/ a 19 pitch Mirage plus---1:50 drive gears-----ran perfect-----Have a friend that just bougt a 1994 24" Outlaw/ w/a brand new 454/330 HP witha 21" Mirage Plus---------a dog getting up on plane----We put my 19" Mirage plus and she is perfect!!!! Both have a low -X-dimension point------So I bought a used 23 pitch Mirage Plus to try as I'm replacing the 320 ho with a 502 HP as You have helped me so far and know !!! I wished other guys with there 25' outlaw with the 375/425 HP would just let me know what prop pitch they are running!!!! I have read this low dimension does not do well with a 4 blade prop !!!! ????????????????????/ Thanks Mike !!!!!!!
    Reply With Quote
     

  5. Collapse Details
     
    #5
    Founding Member / Super Moderator Ratickle's Avatar
    Join Date
    Oct 2008
    Location
    West Michigan
    Posts
    37,266
    Blog Entries
    44
    I shot an email to Brett, I'm sure he'll be on as soon as he gets a chance. From what I know, there are plenty of way to have four blade props with no stern lift. I run 26, 27, and 28 pitch 4 blades on the Marlin, and stern lift on it would be a really bad thing.....
    Getting bad advice is unfortunate, taking bad advice is a Serious matter!!
    Reply With Quote
     

  6. Collapse Details
     
    #6
    Hello,

    Labbed 25 M='s for speed and 24-24 Bravo 1's for all around performance.

    Also, 23 Rev 4's can be a great cost effective option.

    You state you have 500HP. I would test something/anything close to start with. This will give us a better base line and point us in the correct direction. We have tons of test props to try if you are interested.

    Brett
    Brett Anderson / Owner BBLADES Professional Propellers
    920-295-4435 www.bblades.com
    Reply With Quote
     

  7. Collapse Details
     
    #7
    Founding Member / Super Moderator Ratickle's Avatar
    Join Date
    Oct 2008
    Location
    West Michigan
    Posts
    37,266
    Blog Entries
    44
    I knew you'd have worked with a similar setup before. Busy???
    Getting bad advice is unfortunate, taking bad advice is a Serious matter!!
    Reply With Quote
     

  8. Collapse Details
     
    #8
    Yes, we are busy!
    Thanks for the understanding.

    Brett
    Brett Anderson / Owner BBLADES Professional Propellers
    920-295-4435 www.bblades.com
    Reply With Quote
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •