Page 1 of 3 1 2 3 LastLast
Results 1 to 20 of 54
  1. Collapse Details
    24baja with 700hp
    #1
    here is my motor on the dyno . how fAST DO YOU THINK????? http://www.youtube.com/watch?v=eL8i0Tnw7Qk
    Reply With Quote
     

  2. Collapse Details
     
    #2
    Registered Donskihp's Avatar
    Join Date
    Mar 2010
    Location
    VA.
    Posts
    553
    Whats your boat weight?
    Reply With Quote
     

  3. Collapse Details
     
    #3
    BOAT IS 4000PD TWO WEEKS AGO IT DID 80.4 MPH WITH 600HP
    Reply With Quote
     

  4. Collapse Details
     
    #4
    Pretty fast for that hull. Becareful.
    Reply With Quote
     

  5. Collapse Details
     
    #5
    Nice job. Be careful with all that pushing a 24'.
    Reply With Quote
     

  6. Collapse Details
     
    #6
    Registered Donskihp's Avatar
    Join Date
    Mar 2010
    Location
    VA.
    Posts
    553
    I've seen test showing how much hp to push a boat 1 mph, and it seem to always adds up to 20 hp for 1 mph. which would increase your by 5 mph. my guess would now be 85mph
    Reply With Quote
     

  7. Collapse Details
     
    #7
    Registered jeffswav's Avatar
    Join Date
    Oct 2009
    Location
    Millstadt IL
    Posts
    367
    Bob, I would think 85 or so. Raising your x would make a huge difference in speed and handling. I would be a little nervous running that fast trimed up with the stock drive height. My boat is more stable now at 74 that when I ran 68 with the stock x.
    Reply With Quote
     

  8. Collapse Details
     
    #8
    Registered jeffswav's Avatar
    Join Date
    Oct 2009
    Location
    Millstadt IL
    Posts
    367
    Also, what drive are you running. You are pushing your luck with the Bravo.
    Reply With Quote
     

  9. Collapse Details
     
    #9
    Registered Offshore Ginger's Avatar
    Join Date
    Nov 2008
    Location
    Homeless in West Mich
    Posts
    1,928
    Bob , seeing that you are running 700 HP you are going to have to change your screen name to bajabob 700 and drop the 600
    Reply With Quote
     

  10. Collapse Details
     
    #10
    Quote Originally Posted by Offshore Ginger View Post
    Bob , seeing that you are running 700 HP you are going to have to change your screen name to bajabob 700 and drop the 600
    ya you are rigth . i think 600 was all i wanted to run . o well my finaly run today was 34deg. 680tq 718hp.
    Reply With Quote
     

  11. Collapse Details
     
    #11
    Registered Offshore Ginger's Avatar
    Join Date
    Nov 2008
    Location
    Homeless in West Mich
    Posts
    1,928
    Quote Originally Posted by bajabob 600 View Post
    ya you are rigth . i think 600 was all i wanted to run . o well my finaly run today was 34deg. 680tq 718hp.
    So now its going to be bajabob 718 kinda got a nice ring to it .
    Reply With Quote
     

  12. Collapse Details
     
    #12
    Registered Trim'd Up's Avatar
    Join Date
    Nov 2008
    Location
    STL, on the ILL side
    Posts
    1,608
    I had the same boat to 91 gps with me and a buddy in it with more throttle left. My engine made 711hp on the dyno. The X dimension on my boat was raised 3 1/2"s, all of the wood was replaced with coosa, and the cuddy was stripped so it quite a bit lighter than stock. The boat is running 75+ with a stock 502 mag now so the weight savings made a difference.
    Reply With Quote
     

  13. Collapse Details
     
    #13
    Quote Originally Posted by Trim'd Up View Post
    I had the same boat to 91 gps with me and a buddy in it with more throttle left. My engine made 711hp on the dyno. The X dimension on my boat was raised 3 1/2"s, all of the wood was replaced with coosa, and the cuddy was stripped so it quite a bit lighter than stock. The boat is running 75+ with a stock 502 mag now so the weight savings made a difference.
    nice jop wt prop were you runnig . here is my dyno last pull. now in the boat i hope to test saturday
    Attached Thumbnails Attached Thumbnails dynofinal.jpg  
    Reply With Quote
     

  14. Collapse Details
     
    #14
    Registered Trim'd Up's Avatar
    Join Date
    Nov 2008
    Location
    STL, on the ILL side
    Posts
    1,608
    Quote Originally Posted by bajabob 600 View Post
    nice jop wt prop were you runnig . here is my dyno last pull. now in the boat i hope to test saturday
    A 4 blade Mach 30p. I really like the Mach props on the outlaws as do a few of my friends that have the same boats. The boat was MUCH more stable than with a Bravo.
    Reply With Quote
     

  15. Collapse Details
     
    #15
    ya i am runnig a136drive with a 25mirage with the last motor
    Reply With Quote
     

  16. Collapse Details
     
    #16
    Reply With Quote
     

  17. Collapse Details
     
    #17
    Registered baditude's Avatar
    Join Date
    Dec 2008
    Location
    overland Park loto 87mm
    Posts
    4
    i see 85-86ish in my 24 running what whipple says is 650hp with a 4 inch raised x, extension box, and 2 inch shorty running a labbed 32p 5 blade
    Reply With Quote
     

  18. Collapse Details
     
    #18
    wow that great did the 4in lift help alot?did you try your boat with out the 4in ? and if you did wt speed did you get out of it . i am still tested and like to go in the rigth direction
    Reply With Quote
     

  19. Collapse Details
     
    #19
    Registered baditude's Avatar
    Join Date
    Dec 2008
    Location
    overland Park loto 87mm
    Posts
    4
    i bought the boat as is the previous owner said that with the old motor a procharged 502 with a stock bravo 1 stock x dimension and single ram steering said it was low to mid 70s and was fairly unstable
    Reply With Quote
     

  20. Collapse Details
     
    #20
    Registered jeffswav's Avatar
    Join Date
    Oct 2009
    Location
    Millstadt IL
    Posts
    367
    Quote Originally Posted by baditude View Post
    i see 85-86ish in my 24 running what whipple says is 650hp with a 4 inch raised x, extension box, and 2 inch shorty running a labbed 32p 5 blade
    What is your propshaft depth? What ext box did you use?
    Reply With Quote
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •