Results 1 to 8 of 8
  1. Collapse Details
    GPS Spedo antenna removal
    #1
    Registered Donskihp's Avatar
    Join Date
    Mar 2010
    Location
    VA.
    Posts
    553
    My Livorsi GPS spedo antennt was glued to the top of my dash with 3M 5200 sealant. The old antenna was one that has a battery in it. Iv'e tried to remove the antenna with no sucess.I don't care if I destroy the antenna as long as I don't scar or mar my dash.
    Reply With Quote
     

  2. Collapse Details
     
    #2
    Competitor / Charter Member imco offshore's Avatar
    Join Date
    Apr 2009
    Posts
    2,286
    maybe try a long fishing leeder (piano wire) and saw it off pulling up as not to touch the deck,,just a thought,,,,,
    IMCO #10- 2009 National Champions
    Reply With Quote
     

  3. Collapse Details
     
    #3
    Registered Donskihp's Avatar
    Join Date
    Mar 2010
    Location
    VA.
    Posts
    553
    Might work with a real thin leader.I'll give it a try!
    Reply With Quote
     

  4. Collapse Details
     
    #4
    Most technicians and most parts stores will have a roll of "piano wire" this is real thin, real strong and will cut the area you need, be careful, it will cut you pretty good too.
    Reply With Quote
     

  5. Collapse Details
     
    #5
    Founding Member / Super Moderator Ratickle's Avatar
    Join Date
    Oct 2008
    Location
    West Michigan
    Posts
    37,351
    Blog Entries
    44
    Quote Originally Posted by Geronimo36 View Post
    which stuff are you referring to??? Lifeseal will come off with some moderate pressure using a terry cloth and some spraynine or greezoff, worst case some acetone. 5200 comes off with the release agent but it doesn't penetrate well so if you have it on say a trim tab, good luck! Had someone put on an outboard brakcket with 5200 once and we lifted the entire boat by the bracket and it didn't come off... 4 guys jumping on the back finally ripped it off and took all the gelcoat with it.

    A quote from Frank awhile back.....



    Quote Originally Posted by Donskihp View Post
    My Livorsi GPS spedo antennt was glued to the top of my dash with 3M 5200 sealant. The old antenna was one that has a battery in it. Iv'e tried to remove the antenna with no sucess.I don't care if I destroy the antenna as long as I don't scar or mar my dash.
    Getting bad advice is unfortunate, taking bad advice is a Serious matter!!
    Reply With Quote
     

  6. Collapse Details
     
    #6
    Registered Donskihp's Avatar
    Join Date
    Mar 2010
    Location
    VA.
    Posts
    553
    Couldn't find a local place for piano wire, however a found some guitar string (wire) at a local guitar shop.It worked like a champ.Thanks for the suggestion!
    Reply With Quote
     

  7. Collapse Details
     
    #7
    Quote Originally Posted by Donskihp View Post
    Couldn't find a local place for piano wire, however a found some guitar string (wire) at a local guitar shop.It worked like a champ.Thanks for the suggestion!
    Great idea! If I run out I'll just go raid my son's guitar, get the job done and quiet the noise too! Kill two birds with one stone
    Reply With Quote
     

  8. Collapse Details
     
    #8
    Competitor / Charter Member imco offshore's Avatar
    Join Date
    Apr 2009
    Posts
    2,286
    glad to hear it ,,good luck ,,
    IMCO #10- 2009 National Champions
    Reply With Quote
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •